Help for Tune Smithy Koch snowflake icon.gif

FAQ - General

From Tune Smithy

(Difference between revisions)
Jump to: navigation, search
Line 117: Line 117:
The Custom option lets you use any other audio conversion command line tool with FTS. There are list entries for two custom formats which you can set up as you like. If you come across one that you think should really be included in FTS already, together with a suitable command line tool to do the conversion,please be sure to let me know so I can add it in to the list proper: []
The Custom option lets you use any other audio conversion command line tool with FTS. You have two custom formats which you can set up as you like. If you have an audio format which you think should be included in FTS already, and a freely available command line tool to do the conversion, do let me know and I may add it to the list: []
To add a custom encoding, make a file called " <span class="Navigation">custom_audio.txt </span>" in your Fractal Tune Smithy folder, which has a three lines in it as follows.
To add a custom encoding, make a file called "<span class="Navigation">custom_audio.txt </span>" in your Fractal Tune Smithy folder, with three lines in it like this:
Here the example uses <span class="Navigation">SOX </span>and the <span class="Navigation">. AU </span>format - of course FTS is set up to do <span class="Navigation">. AU </span>files like this already, but it could be used as a test to see how it works <span class="Navigation"><nowiki>: </nowiki></span>
<source lang="text">
</source >
(this is already included in FTS as one of the standard formats, so just doing it like this by way of example)
<span class="UserInput">. AU <br /> C:\SOX\SOX.EXE <br /> *INPUT *ARGS *OUTPUT </span>
Make sure that these are on separate lines, and in the first three lines of the file.
You need to put these on separate lines in the first three lines of the file:
Line 1: File extension (e.g <span class="Navigation">. AU </span>) <br />
Line 2: Complete path and file for the application to use <br />
Line 3: The parameters to pass to it. In many cases you can just use the line shown here.
File extension (e.g <span class="Navigation">. AU </span>) <br /> Complete path and file for the application to use <br /> The parameters to pass to it. In many cases you can just use the line shown here.
In line 3, <span class="Navigation"><nowiki>*INPUT </nowiki></span>gets replaced with the name of the file to encodeg (i.e. the .wav file), and <span class="Navigation"><nowiki>*OUTPUT </nowiki></span>with the output file name (same file name with the new extension, in this case <span class="Navigation">. AU </span>).  
Here, <span class="Navigation"><nowiki>*INPUT </nowiki></span>gets replaced with the input file name for the encoding (i.e. the .wav file), and <span class="Navigation"><nowiki>*OUTPUT </nowiki></span>with the output file name (the one with the new file extension, in this case <span class="Navigation">. AU </span>). These file names get put in quotes before the substitution is made, as is usually required when passing file names on the command line in Windows - so you don't put the <span class="Navigation"><nowiki>*INPUT </nowiki></span>or <span class="Navigation"><nowiki>*OUTPUT </nowiki></span>themselves in quotes. Finally, <span class="Navigation"><nowiki>*ARGS </nowiki></span>gets replaced by whatever the user enters for the Extra Arguments field in FTS - or ignored if there are no extra arguments supplied.
The file names are put in quotes, as is normal for the command line in Windows - so don't put the <span class="Navigation">*INPUT/span> or <span class="Navigation">*OUTPUT</span> themselves in quotes.  
Here is another example, with parameters included as part of the format. The Sun AU for applets format could just as well be done like this. It adds in all the necessary parameters needed to specify the version of the .au format suitable for Java applets:
The <span class="Navigation">*ARGS</span> is used for anything the user puts in the Extra Arguments field in FTS - it is ignored if no extra arguments are supplied.
<span class="Navigation">. AU <br /> C:\SOX\SOX.EXE <br /> *INPUT -U -b -c 1 -r 8000 *ARGS *OUTPUT </span>
Here is another example - it shows how you can include necessary parameters as part of the format in line 3. It adds in all the necessary parameters needed to specify the version of the .au format suitable for Java applets:
So to give a concrete example to show how this all works - suppose you want to save your recording as in the Java .au format, and have the usual install folder for FTS and SOX, and supply no extra arguments. You then just provide the file name for the recording as usual, and select the custom format, and then FTS would use this comand line to convert the file:
<source lang="text">
*INPUT -U -b -c 1 -r 8000 *ARGS *OUTPUT
(already included in FTS as the java applets .au save format)
<span class="Navigation">C:\SOX\SOX.EXE </span><span class="Navigation">"c:\Program Files\Fractal Tune Smithy\Playalong.wav" </span><span class="UserInput">-U -b -c 1 -r 8000 " </span><span class="UserInput">c:\Program Files\Fractal Tune Smithy\ </span><span class="Navigation">" </span>
For this one, suppose you want to save your recording as in the Java .au format, and have the usual install folder for FTS and SOX, and so use Playalong as the file name, and supply no extra arguments.
For decoding make a similar file called " <span class="Navigation">custom_audio_decode.txt </span>". This time of course, <span class="Navigation"><nowiki>*INPUT </nowiki></span>gets replaced with the file you want to decode to .WAV, - e.g. the one with extension .au in this case. The decoding is needed in FTS if you use <span class="Navigation">File | Open | Files of type | </span><span class="Navigation">Wave Sound </span>. to open these files, e.g. for spectrum analysis or to do Wav2Midi work in FTS to find seed notes from the recording.
FTS would use this comand line to convert the file:
If the encoding and decoding require the same comand line (with just the names of the input and output files swapped around) then you don't need a separate decoding step - just delete " <span class="Navigation">custom_audio_decode.txt </span>" if present. Then " <span class="Navigation">custom_audio.txt </span>" gets used for both encoding and decoding.
<span class="UserInput">C:\SOX\SOX.EXE "c:\Program Files\Fractal Tune Smithy\Playalong.wav" -U -b -c 1 -r 8000 " c:\Program Files\Fractal Tune Smithy\" </span>
For Custom 2, use the same method but call your files " <span class="Navigation">custom2_audio.txt </span>", and " <span class="Navigation">custom2_audio_decode.txt </span>"
For decoding make a similar file called " <span class="Navigation">custom_audio_decode.txt </span>". This time of course, <span class="Navigation">*INPUT</span>gets replaced with the file you want to decode to .WAV, - e.g. the one with extension .au in this case.
[#top top], [#audio_formats start of section]
This decoding will be used if you use <span class="Navigation">File | Open | Files of type | </span><span class="Navigation">Wave Sound </span>. to open these files, e.g. for spectrum analysis or to do Wav2Midi work in FTS to find seed notes from the recording.
If the encoding and decoding require the same comand line (with just the names of the input and output files swapped around) then you don't need a separate decoding step - just delete " <span class="Navigation">custom_audio_decode.txt </span>" if present.
If there is no <span class="Navigation">custom_audio_decode.txt </span>, "<span class="Navigation">custom_audio.txt </span>" gets used for both encoding and decoding.
For Custom 2, use the same method but call your files " <span class="Navigation">custom2_audio.txt </span>", and " <span class="Navigation">custom2_audio_decode.txt </span>"
===Alernative way to make mp3s etc - record as Wav then convert===
===Alernative way to make mp3s etc - record as Wav then convert===

Revision as of 20:28, 9 July 2008

Feel free to add more questions and answers. If you have a question which isn't answered here - for immediate help contact - and you can also add it to the Questions Pending page.

For old version - auto converted (and partly edited) FAQ - General - auto


How do I save my work?


FTS has many formats, so you need to decide what you want to save. Many are saved from File | Save As and then you choose the file type there. You can also save the file and e-mail it to someone all in one go using File | Save As & E-mail

Some of the main formats

To save an entire project, use File | Save As Project. This includes just about everything - as well as the fractal tune and midi settings, it also saves your choice of format to display scales, the skin, the colours and so on. You can choose what to save in the Project Options window.

Save scales using File | Save As | "SCALA Scales (*.scl)" - this format was developed by Manuel Op de Coul for his SCALA program, and has become the standard format for exchanging scales.

For fractal tune tasks, to save just the fractal tune itself, save as Tune Smithy Files (*.ts).

The Music Keyboard and Midi Relay Settings (*.rly) saves the settings for midi in and out, and also includes the scale and any other options that affect how notes from midi in are retuned.

The Play from PC Keyboard, Music Kbd && Relay Settings format saves anything that affects the PC Keyboard Player as well as all the midi relaying formats.

There are many other file formats available. To keep the Save As drop menu more manageable normally it shows only some of the most commonly needed ones for the current task. Other formats are available from individual windows.

To show all the formats Tune Smithy recognises, go to File | Recently Visited Files & File Types(Ctrl; + 183) and unselect Short list of file types. This window is also useful as a quick way to navigate between the folders you use most often, and to bring up files that you opened or saved recently.

alternatives to the project save

These have been mainly superceded now by the Project Save. But they may be useful on occasion.

One alternative to the project save, which saves nearly everything, but not your choice of main window task, and some other things like window positions, is to use the Configuration settings (ext..INI)

You can also all your settings as a desktop shortcut from File | Make Desktop Shortcut. This saves a .ini file with all your current settings, also a start_up_etc file (special .ini file with the settings left out of the normal .ini file) and makes a desktop shortcut which you can use later to launch FTS again with those particular settings. This is the same method that's used to distinguish between the various tasks in the tasks folder, and can be useful if you want to make your own shortcuts to launch FTS with different settings, e.g. from the desktop or wherever.

After you have made the shortcut in this way you can move it wherever you like on your computer, or rename it - it will still bring up FTS with the same settings. What distinguishes it from other shortcuts, is the name used for its .ini file, which you can see if you look at the shortcut properties (in the command line field).

Audio recordings

To save your work as a .MIDI file or as an mp3 or such like, you normally do that from the Record to File Options window. You can start and stop the recording from the record buttons in the main window, but go to the Recording Options window to set the file name to save and to set various options. You get to this window from Bs | Record to File Options or go to it using the To File button. Record to File button - tied quaver with wavy line in the main window.

See the next FAQ for more details: How do I record and play back recordings?

Fractal tunes are special, if you want to do a MIDI recording from the start of the tune, the best way to save them as as MIDI files from File | Save As | Files of type | Current Fractal Tune as Midi File. This does it all in one go - you don't need to wait for the tune to play. Also the exact desired times are saved rather than the actual times that were achieved during play of the tune. You choose how much of the recording to save (since many of the tunes are very long and for all practical purposes endless) from File | Midi FileOptions | Playing time for fractal tune save.

If this hasn't answered your question be sure to contact I know that with the large number of file formats supported there is some potential for confusion, and it isn't always easy to find the information you need in this help - and some things may not even have been documented here yet.

For a more techy account of the file formats, start at: [User_guide.htm#Open_and_Save Open and Save]

How do I record and play back recordings?


You can show the recording dialog from Bs | Record to File Options or go to it using the To File button. Record to File button - tied quaver with wavy line in the main window.

Choose one of the audio formats from the list.

audio formats

MIDI records music as note and instrument numbers. This file format contains no audio data as such, and plays on the listeners soundcard synth or synth / soft synth - much like playing notes on a keyboard synth, indeed you can often play midi tunes on such synths. It usually gives the smallest file sizes, but is highly dependent on the quality of the synth used to play it back.

CSound records it as a CSound Score and orchestra, using the instruments in the CSound instruments for parts window, which you can then render to an audio file using the CSound renderer. To use this option you need to install CSound - if you select this option you will be taken to a page where you can get an installer for a minimal version of CSound suitable for use with FTS if you don't have it already. The listener hears this pretty much exactly as you heard it yourself.

The other audio formats record the sounds you hear using the devices selected in the Out menu. This means that the listener hears the recording pretty much exactly as you will hear it if you play your own recording back

How to record

Set the folder and file name for your recording in the To File , and in current folder fields..

For all audio formats except Midi, be sure to select the recording volume level and choose a suitable source for the recordng - using the Record Vol (WAV) button - your system may be set to record from the microphone for instance. Also be sure you set the fader volume accordingly and don't have it set to 0. This isn't needed for Midi though as the entire recording is done within FTS itself in that case.

You show / hide the faders from Record Control | Options | Properties . If you need more information at this point, or don't see the control when you press the button, go to [troubleshooting.htm#why_no_rec_sound Why is no sound recorded in the audio formats?] for help.

When ready to start your recording, click the Record to File button. For more about this window see [main_window.htm#record_to_file_config Record to file]

Now do a test recording, maybe record a fractal tune or play a few notes. If this doesn't work, perhaps you need to try another fader - try any suitable looking ones. If it still doesn't work, check to see if you have a half duplex sound card instead of a full duplex one - you need a full duplex soundcard to play and record at the same time. If this is your situation, see [troubleshooting.htm#why_no_rec_sound Why is no sound recorded in the audio formats?]


Two options are particularly relevant for fractal tunes: Start recording just before tune starts , and Stop at end of tune . If you select these both, it means that the recording will start when you press the play button in the main window, so you don't need to start the recording first yourself. Also it will stop as soon as you stop the tune.

For the WAV or .MID formats, you can click the main window Rec. Rec. button - red buttonor Midi Record to Midi icon - red button with quaver buttons which select the format and start the recording all in one go

If your final recording has a gap at the start and the end of it, then you can remove this in FTS provided the recording is small enough to fit in its entirety in RAM. Open the recording again using Open | Files of type | Wave Sound In the Recording window that pops up, choose Options then Find region to trim - and look out for the option to set how much overlap to leave to either side here (often you don't want to trim right down to the beginning and end of the sound but wish to leave a tiny gap). Then click Trim to highlight .

Another option here is to make the clip in Midi format and then render it in .WAV format using a Midi to Wav renderer. The Virtual Sound Canvas can render midi clips directly in this way. See [index.htm#sq_r_y_qt Roland, Yamaha and Quicktime] for more about the Roland. There are other midi to Wav renderers available too. Of course you can also use this method to render any midi clips you make of your own playing.

Adding support for the latest mp3 encoders, and add Sun Au etc

As installed, FTS can only record in waveform audio, or Midi. However you can add other sound formats by installing suitable helper apps.

You can do this all in one go using a special installer I made for Tune Smithy - see the on-line page: Adding other sound formats to FTS.

You will also find details there about how to add them in separately - e.g. to get the latest encoders. For instance, the quality of sound you get for the mp3 encoders continues to improve as the programmers find ways to improve the encoding.

After you run the installer, or unzip the archive for the helper app, you need to browse to find it from FTS | File | File Associations | More Options so that FTS can find it. However, if you use the all in one installer, this isn't necessary as it installs them into the program's own folder, under standard names, so that Tune Smithy can find them automatically.

Note that FTS will record audio files as .uncompressed wav files first, then it uses the helper app to convert these to the desired format. If you want to remove the original .wav files to save space on your hard drive, you need to delete them yourself later (FTS doesn't do it automatically in case you want to convert the same .wav file into a number of different formats - this lets you do this without the need to re-record it each time). See [#windows_newbies_tip Tip for Windows newbies].

To convert to real audio you use the free Helix Producer from Real Audio. They did an encoder before which worked for all their audio formats. This new version however will only convert to Real Audio 9 format - and to make backwards compatible audio clips for the earlier versions of Real Player you are supposed to buy the Helix Producer Plus - well so it says on the web site, and in the program too when you run it.

Or you can add them in separately.

These helper apps will also be useful if you want to read the various audio formats in FTS, e.g. for spectrum analysis or to find seed notes from the recording (e.g. using File | Open | Files of type | Wave Sound).

For mp3s, download the Latest verion of Lame. This is a console app, i.e. it runs from the MSDOS prompt. However, if you are also interested in converting other .wav files to mp3s yourself, then you may like to get it's windows interface at the same time - RazorLame . You can get both in one go from If you use this, be sure to look at my [#razorlame tip for users of RazorLame].

Tip for users of Real Audio : actually the Real Audio 9 clips it makes seem to play fine in Real Audio 8 too. To make sure that it will play them by file association, just make a Real Audio 9 clip, which will have file extension .RM. Then just rename the file (right click | rename in Explorer) and change the file extension to the older.RAM or RA extension, and the older players will probably be able to play it too.

Tip for users of RazorLame: I recommend that you go to Options | Expert | q level , and set this to 0 - to make the highest quality mp3s. The preset value (4) does let you do the compression a bit more quickly, but you won't notice this on a modern machine. FTS uses Lame with a q level of 0. Once you have installed it, you should also update its version of Lame to the Latest verion again, which is worth doing as they keep improving it, making smaller better quality mp3s as they refine the methods..

Tip for Windows newbies: If there are many files in the folder, as there are in the FTS install folder, you may want to know how to find the .wav files in Explorer. One way is to show the details view, and click on the title bar for the type column. Alternatively show the files in order modfied, then they will be the most recently modified files if you have just done your recording. Or do a search of the install folder for files of type "*.wav" - or whatever the file type is that you are interested in.

The list of file formats we have so far seem pretty extensive, with all the SOX supported formats, plus mp3s, Real Audio, and Ogg Vorbis - but there are always more that aren't included. The next section is included in case you come across one of those.

. [#top top], [#audio_formats start of section]


The Custom option lets you use any other audio conversion command line tool with FTS. You have two custom formats which you can set up as you like. If you have an audio format which you think should be included in FTS already, and a freely available command line tool to do the conversion, do let me know and I may add it to the list:

To add a custom encoding, make a file called "custom_audio.txt " in your Fractal Tune Smithy folder, with three lines in it like this:


(this is already included in FTS as one of the standard formats, so just doing it like this by way of example)

Make sure that these are on separate lines, and in the first three lines of the file.

Line 1: File extension (e.g . AU )
Line 2: Complete path and file for the application to use
Line 3: The parameters to pass to it. In many cases you can just use the line shown here.

In line 3, *INPUT gets replaced with the name of the file to encodeg (i.e. the .wav file), and *OUTPUT with the output file name (same file name with the new extension, in this case . AU ).

The file names are put in quotes, as is normal for the command line in Windows - so don't put the *INPUT/span> or *OUTPUT themselves in quotes.

The *ARGS is used for anything the user puts in the Extra Arguments field in FTS - it is ignored if no extra arguments are supplied.

Here is another example - it shows how you can include necessary parameters as part of the format in line 3. It adds in all the necessary parameters needed to specify the version of the .au format suitable for Java applets:

*INPUT -U -b -c 1 -r 8000 *ARGS *OUTPUT

(already included in FTS as the java applets .au save format)

For this one, suppose you want to save your recording as in the Java .au format, and have the usual install folder for FTS and SOX, and so use Playalong as the file name, and supply no extra arguments.

FTS would use this comand line to convert the file:

C:\SOX\SOX.EXE "c:\Program Files\Fractal Tune Smithy\Playalong.wav" -U -b -c 1 -r 8000 " c:\Program Files\Fractal Tune Smithy\"

For decoding make a similar file called " custom_audio_decode.txt ". This time of course, *INPUTgets replaced with the file you want to decode to .WAV, - e.g. the one with extension .au in this case.

This decoding will be used if you use File | Open | Files of type | Wave Sound . to open these files, e.g. for spectrum analysis or to do Wav2Midi work in FTS to find seed notes from the recording.

If the encoding and decoding require the same comand line (with just the names of the input and output files swapped around) then you don't need a separate decoding step - just delete " custom_audio_decode.txt " if present.

If there is no custom_audio_decode.txt , "custom_audio.txt " gets used for both encoding and decoding.

For Custom 2, use the same method but call your files " custom2_audio.txt ", and " custom2_audio_decode.txt "

Alernative way to make mp3s etc - record as Wav then convert

You can also record to waveform audio in FTS and then convert the files later. FTS has a button to do this for them one at a time - Bs | Record to File | Convert from .wav .

Or you can use other programs, to get a wider range of formats.

I recommend the free dBpoweramp- Music Converter - as it adds a Convert option to the right click menu which you can use when browsing for files on your hard disk in Explorer . A nice thing about this is that it is multi-select - you can highlight all the .wav files in a folder in Explorer for instance, then using the right click menu convert them all into your desired format in one go.

dBpoweramp can convert many audio types in the same way - all you need to do is to install the codecs for them from the dBpoweramp - Codec Central page.

Amongst other things this page includes various loss-less compression methods. These can compresses audio files up to four times without losing quality, like a kind of audio "Win zip". Waveform audio doesn't zip well by usual methods - the zip is normally roughly the same size as the original, so this is a great boon if disk space is short or you want to e-mail original recordings to someone else who can play them - or back them up to CD.

Opening / Playing

To play back the recording use the Play recording, Play by Association or Play as web page buttons which appear at the bottom of the Record to File window when you stop the recording.

You can also open audio files in FTS using Temp | Open Audio File in the Record to File window menu - which will show the recording in the Recording Temp window (Ctrl + 71)

One useful option in FTS is to automatically trim the recording, removing silence at the start and end. See the Record (temp) - Options window (Ctrl + 108).

For more advanced audio manipulation etc, e.g. copy / paste editing, varying the volume, removing noise and so forth, use a dedicated audio tool such as Goldwave

There's one area where FTS has special capabilities - analysing the sound to find the spectrum or to get the pitches from the recording. The spectrum gives very accurate pitch determinations for sustained chords or single notes, and the Audio Pitch tracer is particularly good for pure sounds like birdsong. Try out the Analyse Sound and Audio Pitch Tracer tasks in the tasks folder for these options.

Does FTS support 24-bit recording?


Yes FTS does support 24-bit recording for the recordng to temporary memory, and for the spectrum analysis and to find notes e.g. in bird song.

However, sorry, it doesn't support this format for the normal Record to File window. FTS uses routines there that can only handle 8 and 16 bit recordings.

How to do it

24-bit recordings can be played on a PC if it has a 24 bit sound card. You can play them using the most recent versions of WinAmp, and you can make the recordings using some software packages.

If you want to record music in the 24-bit format, you need a suitable sound card of course, and you will need to use another program for the recording itself. Most dedicated audio recording programs will these days, such as goldwave. Or you can use the Recording Temp window (Ctrl + 71) in FTS which supports 24 bit recording.

Most of the synths and soft synths you can use with FTS play the notes in 16-bit format. In many cases, these may just as well be recorded in the same format. It may be worth recording in 24-bit if your synth or sound card plays Midi notes in this format, or if you want to combine quiet tracks with loud ones in the same piece of music.


CD players can only play in 16 bit. 24-bit is a standard for a new type of recording.

You can play a 24-bit recording on a computer if it has a sound card which supports 24-bit. You need to use a suitable program to play it such as the most recent version of WinAmp.

This format will probably eventually replace standard audio CDs in general use. Proably they will be recorded as Audio DVDs, - but there are no widely available players for it yet, so no-one yet knows for sure how it will work.

Why are audiophiles so keen on 24-bit recording?

24 bit recordings are needed for ultra high fidelity recordings of quiet background sounds. Examples include quiet sounds that instruments make along with the notes - like guitar fret noise - and quiet instruments played at the same time as loud ones - even quiet passages if the music varies considerably in volume - as is common in orchestral music for instance.

Normal 16-bit recording will record very quiet passages using smaller numbers. These will often use 8 of the available bits or less, so the quality of recordings for ultra-quiet sounds and passages may be extremely poor in 16-bit recordings. It is equivalent in quality to an 8 bit recording played quietly.

An equally quiet section in a 24 bit recording is equivalent in quality to a 16 bit recording played quietly, so is much higher quality.

The old LP is considered by some to still be a superior format to the CD for music with ultra-quiet sections in it.

Can you suggest a computer to get for microtonal music making?


Okay, - this isn't a question about FTS particularly, but it is one that I get asked by FTS users. Musicians who have ventured along this road already, or who run recording studios will have special requirements - and I won't try to address those. However perhaps I can say a few things that will help a newbie music maker, for instance if you have never used a computer for music making before.


The main thing to look out for is the sound card. Some computers, especially laptops, only have on-board sound and there may be no way to install a new soundcard. However nowadays there are many USB soundcards you can use instead, so long as it has USB.

Also it is useful if the [faq_mus.htm#midi_in the sound card has Midi In], unless sure you don't need this. It is needed for standard midi keyboards, and also for other midi input devices you can get, such as wind controllers for wind players, and [Scales_and_Fractal_Tunes.htm#microtonal_instruments specialist keyboards for microtonal music making].

Again, this is somewhat less important nowadays, as you can get USB midi devices such as the UM1-SX to add midi in / out to any computer.

If you want your soundcard to play GM standard midi files such as the ones you can download from midi file web sites, you need one with a GM synth - GM is a midi standard that was developed so that musicians could make midi clips that would sound approximately the same on any GM midi system, e.g. instrument 0 is always an Acoustic Grand Piano (of some description).

Most sound cards can play GM, and if not, you can install a GM soft synth in its place. So this isn't a big deal.

If you use midi only as an intermediate step to make audio clips for others to listen to, as many musicians do, then one doesn't need a GM synth.

Note that you can add a second sound card, or upgrade it - so you don't need to make the best possible decision at this point. This is just to get you started. The soundcards in the SoundBlaster series are good entry level cards as they let you use sound fonts, and come with a decent sound set. I started with one of them - the Sound Blaster Live! (now no longer in production). They are still a fine choice for ones first sound card.

Your soundcard can also be used with a sample player such as Giga or Kontakt to play virtual orchestras (e.g. Garritan Personal Orchestra etc).

There are so many soundcards available these days. Also my strong point is the software, I'm not up to date on hardware at all.

To find out about the most recent sound cards that get recommended, take a glance at the latest issues of the music magazines, such as Computer Music or Sound on Sound.

Operating System

For the operating system - XP is fine for this. Some musicians still use Win 2K or Win 98, which may be preferrable if you have a very old machine.

Vista from a technical point of view seems superior to XP for sound recording - but at present it is still a very high powered operating system which may stress your computer - make sure it has a good Windows Experience Index wikipedia - Windows System Assessment Tool

The main technical difference between these is that Win 2K has no resource limitations - while if you run many programs at once inWn 9x, or show many windows with lists and drop lists in them, then eventually you reach a point where you run out of resources, and can't run any more - in fact the operating system usually freezes at that point if you ignore the earlier warning messages.

Windows XP has better multimedia support than Windows 2K and can run many Win 98 programs - but not necessarily all of them - there are small changes in the operating system. FTS will run fine in either. Also in ME - I haven't tested it in ME myself but it should be fine as FTS gets used in this operating system with no ME specific bug reports yet.

If using Windows 9x, make sure that you have the minimum of other programs running, as this is the most usual cause of crashes in Windows 98. See [midi_in.htm#Trouble_shooting Trouble shooting] for some tips on this.

computer speed

The speed of the processor isn't much of a consideration for ones first music computer. If you use FM synthesis (such as the FM7) then the faster the computer the more polyphony you can get - but on the latest Pcs the polyphony you have there is high anyway. Certainly it's not a case where a twenty percent improvement of speed or the like will be noticeable - as it is for PC gamers.

Giga works best with the fastest hard disks - so it used to be recommended that you have a dedicated hard disk for it. However hard disks are now so fast anyway - a modern one should be plenty fast enough with no special considerations for sample players like Giga for ones first music computer.

quiet PC

So I think the only other consideration is the noise your computer makes. If you are about to get a new computer, then this is the best time to decide whether you want it to be a quiet PC Musicians usually like to have a silent PC - and I gather that you can get one that is so quiet you can't even hear the sound it makes in a recording studio.

It. needn't cost much either - for instance, a quiet hard disk will cost just a bit more than a noisy one, it's just that most people who buy hard disks will buy the slightly cheaper but noiser one. Similarly, you can get quiet fans, and a quiet power unit - which is one of the really noisy units n the computer - and quiet graphics cards, and quiet cooling units for the CPU.Then - no more background hum when doing computer music work :-).

This is also relevant if you want to use your PC to analyse the frequency spectrum of an instrument - the background hum will add extra peaks to the spectrum. Another reason for getting a quiet PC is that the background noise may have distinct pitches to it, which can beat with the chords that you play - this can be confusing when listening to just triads, and trying to hear when they are beat free - they may always have beats with your PC fan etc.


See the article How to silence a computer from Quiet Pc

For those building a quiet PC themselves, this article looks as though it could be helpful: Building your own PC for music. See also the previous article on sound cards and motherboards - Sound on Sound | Articles | August | PC Musician - they are from summer 2001 however, so won't describe the most up to date gear available..

Then, for independent reviews and foruims: Silent PC review. See also the links in The silent PC

Or just do a web search for "quiet Pc" - plenty of material out there..., problem probably will be choosing where to start :-).


For ones first music headphones, the Grado Labs headphones (such as the SR60) are quite a find - if your priority is the best quality of sound for the cost, rather than the appearance. Or for an even lower cost and still with very high quality sound i-Grado Portable Headphones. Some users find them uncomfortable however, I think that's about the only criticism you get of them apart from the appearance.

music keyboard

For the music keyboard, see What should I look out for in a music keyboard?.

swap file to speed up computer

Some musicians set up a separate partition for the swap file - the idea of a swap file is that sometimes you may have more programs running, or audio files in memory than you have the memory available for, so Windows swaps some of them out to disk - and sometimes may swap them out anyway to keep memory free.

Your swap file may run a little faster if you keep it unfragmented - and if you do it in a separate partition all to its own like this, it will never get fragmented. You specify the swap file location from Start | Settings | Control Panel | System | Performance | Virtual Memory | Let me specify my own virtual memory settings in Windows 9x. Don't worry about the alarming message that pops up to check if you really intend to change this advanced setting - it will be fine - so long as you have space available for it on that partition. I use Partition Magic to make new partitions - highly recommended..

However if you have a brand new up to date computer, these speed issues are probably not nearly so relevant as they were a few years ago. You have to be a pro. stretching your software to push a modern computer to its limit, and if that describes your situation, you wouldn't have needed to read this FAQ in the first place as you surely know it all already :-).

How do I analyse a note played in FTS to find the actual pitch played on the sound card / synth / soft synth?

How to do it

Go to Tasks | Analyse Midi Voice .

Click the Standard Settings button. Make sure you have Auto record and analyse selected (standard setting).

Choose the voice you want to analyse from the Voice menu. Set a value for How much to analyse - say 20 seconds. You may get asked if you want to increase the maximum amount of memory to allocate for the recording - the entire recording is kept in computer memory so a limit is set on this. You can also go to Freq. Analysis | Times... to set this value yourself to a high value straight away to avoid seeing those messages again.

Now set how long you want each note to be in the Note (secs) box. For a continuous note on strings / wind etc set this to a large number, say 10000. For plucked or percussive instruments, you may want to set it to a small number such as one second so you get repeated notes, so more data to analyse - however this will also add extra peaks to the spectrum - see [#artefacts artefacts].

Now click the play button, and play the note for a while, say 20 seconds. It gets automatically recorded.

When you click Stop, the note you have just played gets automatically analysed. The Find Freq. button changes to show Halt Search at this point, for a moment or two. When that changes back to Find Freq. the analysis is finished. Now you can use Show Freq. to show the frequency spectrum, and Show partials as text file to show the list of partials.

Scroll down to the bottom of the list of partials (tip: the Windows shortcut key to scroll to end of a text field is Ctrl + End ) - and you'll see something like this:

Closest concert pitch note to lowest fequency C
Deviation of lowest frequency from concert pitch: -0.373259 cents
From 1/1 in pitch window (Midi note 60): -0.373259 cents

This shows that the note was measured to be -0.373259 cents flatter than concert pitch - rather small for a wave table synth, though large for an FM synth.

To get a first idea of the accuracy of the result, look out for the FFT bin size in cents at the fundamental , which you will see a bit earlier in the Show partials as text file results. The accuracy is usually a lot better than that - but it depends a bit on the spectrum - as we will see in a bit.

In the same way you can measure the pitch of the middle c for any of your synth voices.


It is useful to have a look a the spectrum from time to time using Show Freq to see what you are measuring.

RSC recorder middle c.gif

This is the recorder voice of the Roland Sound Canvas, a 60 secs clip, at middle c. It's a log plot, which shows finer details of the spectrum more readily, and I have cropped the botom of the figure, which is blank here in the log plot.. In this particular one I also used the preset windowing of Blackmann from Freq. analysis | Pitch detection | Detection of partials in the spectrum ( [tips.htm#tip_49 shortcut to show the window] : Ctrl +Alt + L ). You can try various windows there - pitch detection may be most accurate if you set it to none - but you will get a cleaner looking spectrum with windowing.

To show the spectrum like this, just click on the Show Freq. button after you do the analysis.

I have clipped it at about 200 hz at the left. This can be useful to do as you sometimes get a few weak partials below the expected pitch, e.g. often there may be one at around 130 Hz for a note expected to be concert pitch c, and one may wish to just ignore those here..

You can clip the spetrum to left and right from Freq. analysis | Options | Frequency spectrum Layout ( [tips.htm#tip_49 shortcut] : Ctrl +Alt + Z ) . Set the Min Freq. to find and to show to a little below the note you are measuring, e.g. if you are measuring a note at concert pitch C, set this to 200 Hz, say.

If you need to re-position a partial by eye, or add or remove partials, this is done by using Ctrl + Right click to remove a partial and Ctrl + left click above a peak to add it as a partial, with other options to fine tune the position of the partials which you get to from Freq. analysis | Options | Frequency spectrum Options

If some of the peaks get missed out - then you need to change the sensitivity for the peak detection. Go to Freq. Analysis | Pitch Det. | Find Peaks in the Spectrum . Then you can vary things in the lower half of this window.

First try the Peak Max Width . Reduce the width, say to 10 Hz, to find more peaks, or increase the number of decibels, say to 80. You can see the effect of your changes by choosing to show the peak detection curves from the Layout window. ( Options | Freq. Spectrum Layout - or the button in this window). The idea here is that if a peak is within the peak detection curve of another peak, it gets left out. So, decreasing the width makes these curves narrower, which means you detect more peaks. The width refers to the width at the chosen difference in decibels, so for example, a width of 40 Hz at 20 Db means that the peak detection curve is 40 Hz wide at a point 20 Db quieter than the peak.

So vary these parameters, and use Refind Peaks and see what happens.

Also try unselecting Only detect larger fluctuations in the spectrum . If that makes a difference, you can fine tune those settings, or just leave it unselected if it isn't needed. It is particularly needed when the frequency spectrum has a fair amount of noise in it, so with small peaks you don't want to detect, also FFT artefacts from repeated notes and so forth..

There are two other values to vary which set a background noise level to ignore - either dependent on the maximum valaue of the spectrum (preset to 0.125 percent), or the average sound level. (preset to 0.125 i.e. one eighth of the average sound level in the spectrum).

Finally, as a useful check of what you are measuring, you can try the wave count method of finding pitch. This is extremely accurate for suitable voices, can be better than the frequency spectrum method. On wave table synths, the Ocarina is often particularly suitable for the wave count method. See [#find_pitch How do I find the pitch of a note (second method)?]

Wave countint is a completely different approach to it, so if both methods show the same frequency it is a pretty strong confirmation that it is indeed the pitch of the note.

So now you are all set to go on and measure other notes, and chords - if you want to do this straight away, skip on to the [#chords chords] section - and perhaps see you here again later :-)..

[#top top], [#check_pitch_accuracy start of section]


To get a better idea of the accuracy, let's look at a spectrum:

You can click Find Freq. to refind the spectrum for the current recording - saves re-recording it. You can show the recording itself, if you wish, from Freq. Analysis | RAM recording - and save it in .wav format from RAM recording | Options , and indeed you can also record it using a microphone, or open an audio file and use that to find the spectrum - Have a look through the [analyse_sound.htm Analyse sound</font>] page to find out more about the other options - it would be something of a digression to go into it all here..

Now zoom in on one of the peaks. To do that, click and drag to highlight the region you are interested in. A details window will pop up. You can use the zoom in / out menu and the left / right menu options for this window to look closely at any point. Or within the detail view, you can use Shift + Left click and Shift + right click to crop it to a smaller region.

RSC recorder detail.gif

This shows a detailed view of the very tip of the leftmost partial (it is stretched out considerably to left and right - the curve you see sloping down towards the edge of this view is just the beginning of the steep curve that makes the peak).

The red line shows a region of one cent above and below the frequency of the measured peak. So we see the measurement is to within considerably better than one cent accuracy. The 0.01051 shown here is in herz, and refers to the bin size - which is the spacing between the data points that make up the spectrum

The data points in a FFT spectrum are at a constant separation in herz - known as the bin size. It depends only on the number of data points in the original recording and the length of it in seconds. Sinced it is a fixed value in hertz, this means that the cents values get smaller as you go higher in pitch. At middle C, 0.01051 herz is the same as 0.07 cents. You can choose to show the values in cents from the Frequency spectrum Layout Ctrl +Alt + Z

So how accurately is the pitch measured. One would think, maybe to the nearest data point. But actually one can do rather better than that - the process of doing so is called peak interpolation. Often these get you to within maybe a third or even a tenth of a bin size when you have a nice clear spectrum. So this measurement we have just found might well be accurate to within maybe 0.02 cents, possibly better. It's rather hard to estimate how good it is actually.

Here is a really close zoom in. I've also set it to show it as a bar chart, which you can do from the layout window:

RSC recorder fine detail.gif

See how the peak is actually made of two data points exactly the same height. If one went for the highest data point, one would have to choose one or other of these (the data points are at the mid points of the bars). However the peak interpolation algorithm has instead gone for the mid point between the two. We can see that this is clearly a more sensible choice for this peak than the mid points of the bars to either side!

One could position the point by eye too and that is a legitimate thing to do actually as this is irregular real life data. An expert can often beat a computer program at analysing such things by eye - in fact, programs sometimes get written which get improved by using feedback by experts (this is a whole area of study in itself in programming, called expert systems).

In this case the partial is nice and clear however, so I don''t know whether an expert could improve on it. Maybe the original computer program can be expected to be better for nice clear cut examples like this one.

There are several peak interpolation methods you can use, which you can select from Freq. Analysis | Pitch Det. | Find Peaks in the Spectrum .

Barycentric , quadratic , Quinns first and second estimator , and Jains method are all three point methods - that means they just use the highest data point of the peak and one point to either side to estimate the position of the peak.

Quinns estimators require one to use Complex FFT. You need to unselect the Real FFT check box at the bottom of this window. Then when you re-find the spectrum, you will find it is a bit slower (probably take roughly twice as long). What Complex FFT does is to take account of the phase of each wave - where it is in its cycle compared with all the other ones. The spectrum itself will look identical, but during the calculation the phase component of the specturm will have been found too, and this is needed by Quinns estimators.

Technical information (skip if not interested): Complex numbers are ones that can use the square root of minus one, and they happen to be especially suitable for finding the frequency spectrum phase information. In fact for those who know a bit about complex numbers, the phase is recorded as the angle the complex number makes with the real axis, and the amplitude is recorded as the magnitude of the complex number (as the square root of the sum of its real and imaginary parts).

I find Jain's method is best of all of the three point methods for musical notes - but each has its good points, so see what you find for your own special data.

Three point methods are pretty standard in this field I gather. However, why stop at three points. In real data like this with irregularly shaped peaks, maybe one should look at more than three points to either side? That's where the mean value idea comes in. It's my own idea and I haven't seen it mentioned anywhere else yet as a technique for frequency spectrum analysis (though surely someone else will have used it - it is nearly always the case that someone has).

Anyway, it works like a charm, and seems to get even more accurate pitch measurements than the others for most musical data, which is what we are interested in here.

The idea is to find the sum of the products of the amplitudes and the frequencies over a region to either side of the peak - and then divide the result by the sum of all the amplitudes within the region. This gives you the mean frequency for the region.

Okay maybe that sounds a bit complicated but it isn't really. It is just like finding the mean of a population in statistics. Here is a [analyse_sound.htm#mean_value slower and more detailed explanation]. It is suitable if the peak is reasonably symmetrical, as the ones for most partials are, for musical notes anyway.

In fact, this option is now the standard setting - because I find it works better than the others in a wider range of situations, for musical notes. But, be sure to try the others too and see what you think for your particular data.

The partial in all these pictures was actually found by the mean value method. Rather than use just three points, as is usual for peak interpolation for frequency analysis, it used perhaps dozens of ponts to either side of the peak. It works well because though the peak is irregular, it is by and large symmetrical, and this point is at the very top and centre of it.

You'll see some other options on the drop list here - you can position the peak yourself using the mouse, and use that to estimate the frequency by eye, or both the frequency and the amplitude of the partial (vertical height).

See [analyse_sound.htm#FFT_freq_detection Finding peaks in the spectrum] for some of the other options in this window.

[#top top], [#check_pitch_accuracy start of section]


First a note about how the frequency spectrum works. The method used is called FFT which means Fast Fourier Transform. Anyway what is special about it is that you can take a finite set of data points for a wave, and convert it into a frequency spectrum with the same number of points. So the more points the wave has (the longer and higher resolution the sample is) then the more accurate the spectrum.

However, a rather extraordinary thing about it is that you can reconstruct the original waveform exactly from the FFT. You need the frequency spectrum and you also need the phase information for all the frequencies as well - this means you need to use a Complex FFT (as it is called) which finds both of these simultaneously. Then you can do this magic trick of recovering the waveform exactly - all the data points in place - from the frequency analysis.

For this to work, the frequency spectrum has to contain information about everything in the original waveform, including things one might not normally think of as frequencies.

For instance, if you play a note once a second - that counts as a frequency. If the notes have vibrato, that also counts as a frequency. If a note starts and stops suddenly, even if it is just a single note, that also counts as a frequency. So, these are the artefacts - they properly belong in the spectrum, the analysis is correct, but they are artefacts because they aren't the things we are interested in.

One might think a note played once a second wouldn't matter because it would be way to the left of the frequency spectrum - and ditto for vibrato. But, the thing is that the frequency spectrum will analyse it, and find not just that frequency, but all its overtones too (any frequency has overtones apart from a perfect sine wave).

Here is a frequency spectrum for the Roland recorder voice again, this time with a pitch vibrato added to it of 10 cents at 2.5 herz .

RSC recorder pitch vibrato.gif

Those extra peaks to either side of the main peak are caused by the pitch vibrato. This time the red line is 10 cents. There are similar peaks around the higher partials, but closer together. Don't ask me to explain the details here - I'm no expert on this - but observationally, this is what happens if you do an FFT of a voice with vibrato.

You can add pitch vibrato yourself at a precise frequency in this way from Parts | More | Pitch Var .

Repeated notes give extra peaks too - look pretty similar to thes.

The sudden stop at the start and end of a clip can also cause artefacts unless you so arrange things that the time for teh clip is an exact multiple of all the frequencies - since most FFT requires the clips to also be of particular lengths only (power of two for the number of samples) this will only happen seldomly.

Usually one uses a so called windowing function. The simplest is triangular windowing - you add a fade in at the start of the recording, all the way up to a maximum at the middle point of the recording - then you fade it out at the end similarly. This fade gets added in to the data just before it gets sent on for the frequency analysis - the recording itself doesn't get changed of course, though you could alternatively do it that way too.

You can try the effect of various windowing functions from Freq. Analysis | Pitch Det. | Find Peaks in the Spectrum

I find that Windowing has less of an effect than vibrato or shorter repeated notes for typical samples for this work of say thirty seconds or so. The main effect is a decrease in the background continuous part of the spectrum - i.e. windowing removes some "noise" from the spectrum. You may also see artefacts if you look at the spectrum in fine detail, and depending on the length of the clip and other details.

Here is the Roland recorder voice again to show the effect of no windowing:

RSC recorder middle c no windowing.gif

What you see here is very dependent on the exact frequency of the note, the length of the recording, and whether you include the attack of the note in it (as windowing naturally will smudge the attack away since it starts the notes). Some choices may lead to few windowing artefacts if any while others may have more obvious artefacts.

To find out more about FFT in its many aspects, try some of the links to sites on the FFTW links page.

[#top top], [#check_pitch_accuracy start of section]

Bells, and missing fundamentals

You can get a program called wavanal for analysing church bells from The Sound of Bells web site..

Bells often have only a very weak partial at the frequency that is perceived as the pitch of the instrument by most listeners, and some may have no partials there at all. See The timbe and pitch of bells.

The author Bill Hibbert synthesizes an example bell sound with partials 5/9~ 6/5~ 2~ 3~ 4~ 16/3~ 13/2~ 8~ 21/2~ (to within 30 cents) for a perceived pitch of 1/1.

The perceived pitch makes a harmonic series with the actual partials 2~ 3~ 4~. However, he finds that even the sound made up of 5/9~ 6/5~ 2~ (hum, tierce and nominal) can be perceived to have it's pitch at the 1/1!. Try his file 8 and see what you think.

His actual frequencies used, in Hertz, are 176.6 390.2 640.9 949.0 1302.4 1690.9 2110.2 2604.6 3380.0 with the usual perceived pitch at 320.5 Hz.

[#top top], [#check_pitch_accuracy start of section]


So now you see how to compare the pitches of the middle cs of all the voices on your synth - try each in turn, play a long-ish note, and see what you find using Show partials as text file .

How about analysing chords though. For those you use Make Chord to analyse . Enter the chord you want to test into the edit field, then click that button, and use the play button as before. With this one, try selecting Add harmonic series analysis . before you use Show partials as text file . This analyses the list of frequencies to look for overtone series.

This gives especially good pitch accuracy for instruments rich in overtones, such as strings, because then it can find the average of maybe ten or more partials for each note of the chord. The higher partials are more precisely determined too, because the frequency spectrum, as it turns out, has finer resolution for higher pitches. (Techy detail: the harmonic series analysis works by dividing all the overtones by integer numbers down to the fundamental, and then taking the average of all those values to find the adjusted frequency of the fundamental.).

The harmonic series analysis is not suitable for the piano or for some inharmonic timbres such as some bell sounds - you will see why if you try analysing a note played on these instruments. The ones that are suitable for the harmonic series analyses are the ones with partials at nearly exact multiples of 1200 cents..

You can enter a single note for the "chord" here if desired - say, 350 cents. You can also use any of the notations you use for entering scales.

You would normally need to click the Make chord to analyse button each time you try a new chord. However, if analysing many chords in this way, you can select Auto remake to automatically remake the chord every time you click the play button - and so save yourself some time.

To get back to the preset (play the 1/1 only) and ignore the chord to analyse, use the Standard Settings button again (which will also unselect Auto remake ).

[#top top], [#check_pitch_accuracy start of section]

What level of pitch accuracy can I expect to find typically?

Wave table synths seem to be variable in this respect, while an FM synth can be really extraordinarily accurate. Typicaly wave table synths seem to vary from say 0.1 cents to 4 cents of accuracy, while FM synths can be accurate to better than 0.01 cents.

Here are a few that I have worked with, but I haven't made an exhaustive set of measurements by any means, these just a result of a few spot checks:

The Virtual Sound Canvas seems to be accurate to about a cent in relative pitch within the same voice, and has similar variation in pitch from one voice to another.

The SB Live! is much more accurate than this within a single voice if it uses a single sample, about 0.2 cents or so. However, it can vary by 2 or 3 cents or more as you vary the sample (i.e from voice to voice, even different registers of the same voice sometimes). The reason for this variation seems to be because the orginal wave samples have their frequencies set to only 2 or 3 cents of accuracy - so it can be fixed, with a great deal of work, by retuning all the individual wave samples. You just need to change the sample rate at the head of the file, which could be done using Autotune perhaps.

The Yamaha soft synth is accurate to perhaps 0.5 cents or so within a single voice.

I sometimes wonder why the wave table synths vary so much as this actually - especially the ones that use only a single waveform for the note. Why is the SB live! for instance only accurate to within 0.2 cents when you use a single waveform - instead of the better than 0.01 cents accuracy of FM synthesis? One would have thought linear stretching of the waveform would do and would have as good pitch accuracy as the FM synths - maybe there is some reason why this doesn't work... (any wave table synth designers reading this??).

The FM7 has much better accuracy - an amazing at least one hundredth of a cent - that is just the limits of my measurements - probably accurate to one thousandth of a cent.

As for the larger variations due to wave samples only pitched to within 2 or 3 cents of the target frequency, I may later add an option to FTS to autotune, and do it so it can retune all the wave samples in a font in one go. However, the FTS peak detection algorihtm needs to be improved first - it finds the frequencies accurately, but sometimes doesn't easily distinguish the main peaks in the spectrum from noise and smaller peaks

Some musicians with particularly fine sensitivity to pitch can distinguish an interval of one cent or better as a melodic step (1200 notes to an octave or more). Most though probably have best pitch resolution in the range four to fifteen cents, and some with no musical training are unable to distinguish notes a semitone apart. So, these are pitch variations beyond the limit of hearing for most.

So, why are we concerned about them - it's because fine pitch distinctions are more important in chords, and can be more noticeable, as they can cause beats. There, even a one or two cent distinction can be fairly easily noticeable.

Try this - show a scale window, and set the step to 1 cent, and try playing two notes together (say harpsichord) and you may hear beats - a slow wah wah type sound as the note fades away. Try comparing the equal temperament 1/1 700.0 and 1/1 3/2 and you'll probably hear beats in the equal temperament one.

You may hear slow beats in the 3/2 too though, with a wave table synth. (Something to watch out for - notes can also beat with the hum from your computer).

Probably not that many performers are able to play notes to better than one cent accuracy - even in sustained chords. It is a fine pitch distinction to make, and easily overwhelmed by the slightest vibrato or involuntary pitch variation. In the case of fixed pitched instruments, maybe you can tune it to this accuracy, but then the tuning may change a little during performance or because of change of temperature etc.

However, some modern microtonal performers do indeed claim that in their performances they can pitch notes to the exact cent desired, and that they can hear the distinction between notes a cent apart melodically.

The wave table synths leave something to be desired by comparision, but are fine for getting to know and enjoy microtones. If you want to hear the purest possible intervals you can get in computer generated music, try an FM synth such as the FM7.

[#top top]

What is pitch bend and how is it applied?

Midi is set up to work with the twelve equal scale. Each note has a number between 0 and 127. The number is the number of semitones above the 0 note, with the 0 chosen to be five octaves below middle c. So 60 is middle c, 61 is c#, 62 is d etc. This spans the entire range of musically useful notes.

However, when one wants to play notes "in the cracks between the keys" of a twelve equal keyboard, you need to bend the pitch up or down from its twelve equal position. Midi keyboards often have a pitch bend wheel - and when you move it, it bends the current note up / down in pitch - usually with a range of plus or minus a whole tone.

So if you want the pure just intonation 5/4 for your e above middle c, at 386 cents for instance, you could make its Midi note 64 flat by 14 cents by moving the wheel by the appropriate amount. Unfortunately for this approach though, the wheel applies to the keyboard as a whole, so all the notes will get moved down, including the c as well. That's not what we want.

The solution here is to play the c and e on separate Midi channels. The pitch bend only applies to one channel at a time - though this does require that you have a multi-timbral synth or soundcard - one that lets you play notes on separate channels. Supposing all is well and you can indeed play on separate channels, then what you do is to play the c on channel 1 say, and the e on channel 2. Then bend the pitch for channel 2 down by 14 cents - and there you are, a perfect just intonation major third diad. To complete this to make a triad you'd then play a g on say channel 3, and bend the pitch of it up by 2 cents.

You can make any chord in this way, so long as it needs no more than 15 simuiltaneous pitch bends. That's not much of a restriction as few scales have more than 15 distinct pitches in them. Notes a perfect octave apart can be played in the same channel (also notes at any equal tempered interval such as say 300 cents etc.). Non octave scales are more tricky and you can run out of channels if you have more than 15 simultaneous notes in a chord in a non octave scale. For more about this, see [Scales_and_Fractal_Tunes.htm#sit_run_out_of_out_chann Situations where one can run out of channels].

Although this used the pitch bend wheel, you can do it also by sending an appropriate mdi message. Composers of microtonal music used to insert these pitch bends by hand into their scores in order to pitch bend the notes - indeed a few still do it this way. But, I think it is a little easier to use a progoram like FTS or SCALA to do it automatically :-).

Now for the nitty gritty, how its done. The pitch bend is in the range of -200 to + 200 cents. You can see the pitch bends as they are applied in Out | Notes in Play . Play a just major chord for instance - to do this, select the major chord from the Scales drop list. Then in Bs | Arpeggio / Scale Playback , choose chord for the play method, and click the play button for the arpeggio.

Or, perhaps better actually, play it on the PC keyboard and watch to see what pitch bends get applied for each note as you play.

You will see the notes:

60 pitch bend 0 cents
64 pitch bend -14 cents
67 pitch bend + 2 cents

The actual channel used for each note will depend on what has gone before in the tunes or your improvisations. Also, here I'm rounding the figures to the nearest cent - you can choose how many significant figures you want to show in this window, and in most of the FTS windows, from File | scale notation .

(first use File | New . if you have been playing one of the exotic fractal tunes first such as the Fibonacci tonescapes).

How accurately can these notes be pitched then?

The midi spec actually uses numbers in the range 0 to 16833 to specify the pitch bends, where 8192 corresponds to a pitch bend of 0, and 0 means bend the pitch down as far as you can, with the midi standard setting here is -200 cents. The highest pitch bend upwards in the spec is 16833. The next number, 16834 (which you aren't supposed to be able to send) would bend the pitch up by 200 cents.

So each unit of pitch bend is 0.024414 cents. This is a tiny amount and likely to be better than that available on many sound cards or synths and well beyond human pitch perception limits in all except possibly very special situations (one might be possible to detect it by listening to beats in carefully designed synthetic sustained chords).

For those interested in the technicalities, these pitch bend numbers are 14 bit numbers. This is a bit unusual as usually computers use multiples of 8 bits - the reason is that in midi the first bit of each data byte has to be zero as a way of distinguishing them from other types of byte that specify types of event such as note ons and offs. So in midi you send data in multiples of 7 bits. That's also why you have 128 midi voices instead of 256. Here, you have 128*128 (=18634) midi pitch bend units instead of 256*256.

Midi keyboards usually have pitch bend wheels that only send the most significant (7 bit) byte of the pitch bend, which means the smallest pitch bend unit for a wheel is only 200/127 cents = 1.57483 cents. This is fine enough so that most musicians will hear the bend as a continuous slide (pitch bend sensitivity for musicians is often in the range of 4 to 20 cents though some can hear pitch changes less than 1 cent and so I suppose they might perhaps hear a pitch bend wheel slide as a series of melodic steps). Some low end keyboards have pitch bend wheels with only maybe a dozen or so pitch bend steps per semitone..

There's a reason for reducing the number of pitch bend units - if you were to send a pitch bend message for each position of the wheel for 8192 distinct pitches per tone, you'd need to send thousands of messages each time you move the wheel. That would slow everything down - even a modern fast computer might need to pause if you start sending thousands of midi messages in a fraction of a second. This is especially true when you use a midi keyboard, since it connects to the computer via a cable, and transmission along a midi cable is usually much slower than internal processing in the computer itself.

FTS however sends "instant pitch bends", so can use the highest available resolution because it only needs to send one pitch bend each time to retune the note as desired.

[#top top]

How do I do a frequency analysis to find the partials of a note?

See the [#check_pitch_accuracy How do I analyse a note played in FTS to find the actual pitch played on the sound card / soft synth / synth?] FAQ for details about the frequency spectrum method, discussion of artefacts that can occur, and examples.

[#midi_voice Midi Voice], [#note_you_play A note you play yourself or have already recorded].

Midi voice

This is already covered in [#check_pitch_accuracy How do I check the pitch accuracy of my synth / soft synth / sound card synth?]

Here is a quick review::

Tasks | Analyse Midi Voice .

Standard Settings

Make sure you have Auto record and analyse selected.

Choose the voice you want to analyse from the Voice menu.

Set a value for How much to analyse - say 60 seconds. Set Note (secs) to 60 seconds too - if you make it small, then overtones of the repeat period of the repeated notes will add extra peaks to the spectrum.

Now click the play button. When you click the stop button, the note you have just played gets automatically analysed. The Find Freq. button will change to show Halt Search while the note is analysed (maybe very briefly if it is a short recording). So wait a moment for it to turn back to Find Freq.

Then use Show Freq. to show the frequency spectrum, and Show partials as text file to show the list of partials.

You can also resynthesize the sound from its partials and compare it with the original. Use Make Waveform from partials , and then Play synthesised wave .

Select Use original volume envelope to resynthesize it with the same volumes, e.g. the same level of attach and fade away for a percussive or plucked note.

[#top top], [#find_partials start of section]

A note you play yourself, or have already recorded

Tasks | Analyse Recording or Midi Voice .

Now if you have a recording already, open it from Open Audio file

Choose How much to analyse - if you want to analyse the complete clip, set this large

Then in the main window, click Find Frequencies , and Show Frequencies , and that will show the frequency spectrum. Use Show partials as text file to show the list of partials.

To find the partials for a selection from the recording, highlight the part you want to analyse, and use Show Freq. | Options | Find for Detail .

If you want to find the exact pitches for the notes of a chord played on harmonic partials type instruments such as voice / strings / brass / wind etc, try selecting Add harmonic series analysis before you click the Show partials as text file button. Look at the end of the partials file to see the analysis.

If you want to make a new recording then click the Record Control Button and select a suitable recording device such as microphone. Then back in FTS, click Show recording , and press Start rec. .

Alternatively, to keep an eye on the recording as it goes along, show the Oscilloscope and record from there.

The Record Control is the same one you get from Windows if you go to Start | Programs | Accessories | Entertainment | Volume Control and then choose Options | Properties | Recording (Saves a few clicks to do it from this FTS short cut. :-)).

When finished, click Stop Rec . Note that this is a temporary recording which is kept in memory only and will be lost when you exit the program. If you want to save it, use File | Save As | Save as type | Ram Recording as Audio File (*.WAV) . You can also do it from Show recording. | Options | Save recording as .

Then you can play it to check it is recorded okay, and analyse it as before.

[#top top], [#find_partials start of section]

How do I convert the frequency analysis into a scale?

This is easy - just use the Show partials as text file . Then scroll down and you'll find the partials as a scale.

[#top top]

How do I make a custom voice consisting of one instrument playing the partials of another one?

Use Make partials into custom voice .

So for instance, suppose you'd like to hear the sound of a sitar playing the partials of an oboe. Analyse your oboe voice in the usual way. Then click the Make partials into custom voice button. In the window that pops up, click Select Voice or non melodic percussion . Select the Sitar from the Voices menu. Then click End selection.

Now to hear what it sounds like, click Select into highl. Part . Back in the main window view, to try it out, first unselect Auto record and analyse (so you don't record over your oboe recording), and click the play button to hear what it sounds like.

This is a voice you can use like any other midi voice in FTS. You'll find it has been added to the menu in Voice | Custom Voices . For more about the things you can do with custom voices, see the help for those windows: [User_guide2.htm#Custom_Voices Custom Voices] and [User_guide2.htm#custom_voice_as_timbre Custom Voice as Timbre].

[#top top]

How do I find the pitch of a note (second method)?

Tasks | Analyse Recording or Midi Voice .

Record your playing, or open an audio file, or select Auto record only and play one of the midi voices to record it.

Then go to Find Seed , select Find as a single note , and click Find notes .

This works better for some voices than others - tends to work well if the waveform has clearly defined peaks or waves all very similar in shape to each other. It's set up to work well with recorder - but you will find other options from the Find Seed Options drop list (and can save your own presets here too).

If you do this with a wave table synth, it tends to work especially well with ocarina, which tends to be pretty close to a sine wave in shape. Or look and see if you can find a voice that consists of a repeating wave (as shown in the oscilloscope).

You can show the Oscilloscope while the note is played and recorded, and select Oscilloscope Options | Show Info , for a first idea of the pitch.

However, this doesn't do much analysis of the sound - in particular, it skips the search for similar waves, so is fairly likely to show a pitch too high or too low. It finds the pitch based on the length of the current waveform as shown in the window (= same pitch you hear if you click the "Play this" button) - as this is a very short section of the recording, the measured pitch will tend to fluctuate. (However, it uses zero crossing interpolation to get a more accurate measure of the pitch than one might otherwise expect from such a short sample - it measures the length of the waveform not just to the nearest sample, but to a fraction of a sample depending on the interpolated zero crossing point).

[#top top]

Is there a version of FTS for the Mac or Linux?

No, sorry, there isn't.

FTS would need to be written from the start in a multi-platform language such as Ada which Manuel Op de Coul uses for SCALA. As it is written in Windows C, all of it is highly Windows specific.

The way to port it to the Mac would be to use a Windows emulator there of some kind. I am told that FTS is used successfully on a Mac with Virtual PC. Wikepedia entry,

If you haven't heard of it yet, you should also check out Jeff Scott's L'il Miss' Scale Oven. It is used to make scales and to update the tuning tables of synthesizers so that they can play in the scales.

He has an intimate understanding of scales as a composer, so this must surely be a must-have program for Mac microtonal composers and musicians.

For Linux, you could try FTS with Wine. FTS uses only standard Windows calls, so it may work.

I'll be interested to hear if you try out one of these methods, or any other windows emulator, and find it works - let me know which Windows emulator you used, and I will update this FAQ entry accordingly :-).

[#top top]

What language should I learn to write a music program, and how long does it take to write one?


Though not particularly about how to use FTS, this is a FAQ from FTS users. I'm glad if FTS has inspired you to want to program yourself :-).

I'm not really the one to answer this question though. In short - I don't know which language is best. So if you are reading this, in expectation of a how to guide to get you started programming, you'd better stop reading and look elsewhere. I haven't got experience as a teacher of programming, and I probably wouldn't be very good at it either. But perhaps I can give a few sidelights, and anecdotes etc. which may be of interest in some way.

If you want a quick start you certainly shouldn't follow the route I took myself which I think would take just about anyone a fair number of years to get to the point where you can write Windows programs. If starting from scratch now I'd do something different probably myself too.

Probably you could learn to program more quickly than I did as there is much more by way of teaching materials, and guides etc than there were in those days. Also starting your programming experience by learning to program a mainframe computer using a card punch, though interesting, was maybe not the quickest route to learning to program a modern Windows computer :-).

It depends how quickly you pick it up, and also depends on the language you use, but I would guess that even if you start right now, you'd probably need to put in at least a few years before you can write a program like Tune Smithy - but there are some things you'll be able to do pretty early on depending on the language, and what your aims are. If you find you like programming, it's a lot of fun :-).

Some ways people get started

If you want a gentle introduction to programming, you may want to try something easier than music making, as it is quite an advanced topic in most programming languages. There are specialist scripts or languages which focus on music as the main thing they do - CSound for instance, but CSound anyway isn't the easiest of languages to learn either.

Many get started by making Flash animations for web pages. Even children in Primary School are able to make Flash animations, so it can't be that hard to get started on it. Yet it is also a widely needed and useful skill for professional web designers as well. I imagine you get visible results rather quickly. You can also use Flash to play Midi events with the right tools so eventually you may be able to make musical flash animations as well. Try Flash Midi - currently a beta. I can't help with this myself though - so far I haven't needed to learn Flash myself.

As an alternative to building on existing code you can also use various tools that have been developed to make music programs. In some cases the result can only be run within a particular program, and sometimes they can be deployed more generally, within web pages or as stand alone programs. Maybe you will find some useful material amongst the links here:

What language is FTS itself written in, and what are other commonly used languages?

FTS is written in a language called C. That's really the only language I'm familiar with apart from some now nearly obsolete languages that I used to use in the past. I can probably most usefully say things to help any aspiring C music programmers reading this. So I'll focus on that, but before getting to it, I'll mention some other programming languages that I know of.

C++ is often used for Windows programming. It has a reputation as a particularly tough language for beginners however. Usually you would have some earlier programming experience before you tackle this one. Also some C programming normally comes first before you learn C++. The newer C# is supposed to be somewhat easier to use than C++. However, I can't say much more, as I don't use either of them myself.

One language often recommended for beginners is Visual Basic. I don't know much about it either, but have seen example programs of a few lines that are fully functional useful Windows programs. You should be able to do the same things in Visual Basic that you can do in Windows C as you can call the same routines, so for instance you should be able to call the Windows Midi routines to play notes and so on. But again, don't ask me for the details :-).

The visual basic sample project here one from Microsoft looks as if it does all the right things to get one started with midi music programming, assuming one was familiar with Visual Basic already. Check it out with someone experienced in it if interested.

Another language that is good to know is Java - one of many C like languages. It's used for making applets for web pages, and occasionally for stand alone programs. You could reasonably jump into Java straight away without learning any other language first, it is more suitable for beginners than C++. The latest versions of java have midi support - so you can write musical web page applets :-). Again I have little experience in Java myself. Java developers will probably be interested to explore some of the java tools available to generate music - see this page again: - for instance Jsyn if you are into making new virtual instruments and the like..

Then, if you make web pages, it is useful to know javascript. Though the name is similar, actually there is almost no connection with Java - both are C like and they have a few things in common, that is all. I'm not sure how much actual music making you can do in javascript, but it is useful in other ways.

Javascript can be quite a nice introduction to basics of programming. It is not so much used for large programs. It's only suitable for use with forms in web pages and other web page applications, but is widely used for those, and is very useful indeed in that way. It is easy to make a small javascript applet - for an example with few lines of code, see my ratio to cents applet in the cents and ratios page - use view source to see the code (within the script tags). So - if you are interested in very short calculation type applets for web pages, it could be an interesting language to explore.

If you get into javascript, it will save you a lot of time to have a good javascript debugger. You can download free ones for both Internet Explorer, and the Netscape one Venkman. Here is a nice on-line tutorial on Using the Netscape javascript debugger.

There are many other languages - e.g. Small Talk - one of the earliest object orientated and gui based languages, and still going strong. - I'll also mention Ada which is the one that Manuel Op de Coul uses to write SCALA (along with Gtk)- so it must be good :-). It has a reputation as a language that lets one write bug free code more easily and quickly than most languages.

You may also be intereseted in the widget tool kits (which Gtk would be an example of).

Many windows programs are written in C++. Plain windows c programs tend to be "lower level" - useful if you want to optimise them to be as fast as possible.

How did you learn to program yourself?

The route I took myself was first a bit of early main frame programming in Fortran in the early 70s, through Algol at university - then after a gap, C for XWindows on Unix (for some of my maths research) then Windows C.

I think the style of programming I use myself, low level Windows C, would be hard for anyone to learn in less than at least a few years of programming.

I probably would follow a very different route if I were to start programming now. Indeed, the two main languages I learnt in my early days are now rarely used - at least for windows, I'm not sure if you can even use them to make GUI type programs for Windows, at any rate it would be a most unusual route to start with those as your first programming languages nowadays..

Programming in C++ or C anyway is very hard, for a beginner starting from scratch. You would need to allow at least a number of years before you can make useful programs - I believe, for Windows anyway.

However, there may be some future in new C language based languages for beginners. I had a look recently at a language called Ultimate++. It comes with a very nice Integrated Development Environment (IDE), which you can use for ordinary C programming as well. The language itself looks elegant from its descriptions and some things are much simpler thatn they are in normal Windows C++ - and it is designed from scratch to be naturally an object orientated language - unlike C++.

I don't know what the future is for Ultimate++ - it is at present being developed by just a single developer. Though with an enthusiastic body of users to judge by the forums.

This is just a first impression - maybe this or if not this one exactly, something like it may eventually be a good programming language for beginners to Windows programming who like to follow a C like route. The program code in Ultimate++ is remarkably compact and concise compared with either Windows C and Windows C++ code for gui based apps - and has the big advantage too that it is cross platform - the programs can run on a Mac and on Linux as well.

I plan to investigate it for my own programming in the near future. I haven't tested it yet .

Books on C

If you want to learn C++ or Windows C, or some other C based language, first you need to learn C anyway, and the classic book on that is Kerningham and Ritchie " The C Programming Language, Second Edition ".

The classic book on Windows C programming is Charles Petzold's " Programming Windows, 5th Edition ". This explains how to make gui based windows programs in pure C. FTS is written entirely in C in this fashion. FTS is a bit unusual because it is written entirely in plain Windows C. Most programmers use a higher level language for large programs like this one.

Here is the ACCU (Association of C and C++ users) list of Beginner's c programming books (on-line), Advanced c programming, and MS Windows

Music making is a fairly advanced topic in Windows C (chapter 22 in Petzold's book), so I've made a library of subroutines to help with this. You can use it to play notes in any scale or tuning - even in your first "hello world" type programs.It may well be of use for more experienced programmers too (I find it useful myself to get a small music program together quickly). Here it is (on line) PlayMidiLib. I will probably add to it from time to time, and make a few demo programs to show how it can be used.

It's usual for a C programmer to start with console apps, then move on to Windows C later. That's just because of the size of most programs written in plain Windows C. You can make some simple programs that just display an Ok or Ok Cancel message and such like, then the next step up in Charles Petzold's book is to a program of about 80 lines - most of which is specific to Windows. But - if you use one of the modern ultracompact high level C like languages you may be able to write programs with GUIs (Graphical user interfaces) at a much earlier stage.

It's best to get used to the c language first, and how it works, loops, variables, arrays and so forth, and to do that with the minimum of extra overhead. C has inspired many C like languages, and if you learn C you have a good basis from which to learn those too.

It would be nice if someone were to write a book on programming in Windows C from scratch - but I can see the difficulty - there's this gap between a Windows program suitable for about chapter 2 or so, and one for chapter 10 - what do you do in between? Perhaps one could add a library of extra routines which you link in to all your beginner programs, to make input and output of data much easier than it usually is in Windows C - I thnk this approach may have some potential.

Many find C++ a useful language. My own inclinations are towards the lower level type of C programming as in FTS and I have very little experience really of C++. So I'm not the one to recommend C++ books.

C programmers are often interested in programming at a low level - it is a good language to use if you are into optimising your code by hand, and if you know how to optimise your C code, your C programs will run as quickly as programs in any other language except perhaps Assembly Language, though this advantage isn't such a big thing nowadays.. The programs also tend to be a bit smaller too.

[#top top] -[#what_language start of section ]


If you are interested in this style of programming you may also be attracted by assembly - I am. It's possible to write an entire windows program in assembly - I know of one music program in this style called abox. However, this is so rarely done because of the sheer number of lines of code needed - apart from that one, I've only come across one other Windows program entirely in assembly. For those interested in this subject, I came across this site on how to write Windows programs in assembly: Win ASM. .

C compilers translate your code into assembly before they build the program, and often include an option to show the assembly code. Here is one line of code from FTS expanded into Assembly by the compiler.


expanded to

007DBFA7 movsx ecx,byte ptr [zero_line_central]
007DBFAB test ecx,ecx 
007DBFAD je PaintWave+0D9Ah (007dbfba)
007DBFAF mov edx,dword ptr [wave_height]
007DBFB2 mov dword ptr [ebp-23A0h],edx
007DBFB8 jmp PaintWave+0DA5h (007dbfc5)
007DBFBA mov eax,dword ptr [wave_height]
007DBFBD shl eax,1
007DBFBF mov dword ptr [ebp-23A0h],eax
007DBFC5 mov ecx,dword ptr [ebp-23A0h]
007DBFCB mov dword ptr [zero_ypos],ecx

Quite remarkable that anyone should write an entire Windows program in this language. It used to be used frequently for optimising sections of a program for speed - but compilers have got so good at that nowadays that they say you often don't gain much in speed by doing it by hand, and it may even slow your program down if you aren't well up on how the latest generation of chips operate. So, much as I'd like to, I've never had much incentive to learn Assembly, and that is probably true of most C programmers.

Programming tools

Whichever language you decide on, it is worth getting good tools even as a beginner.

It may seem a trivial kind of thing if you are new to programming - syntax colouring is a great help for spotting syntax errors as you type. The idea is to show, e.g. variables in one colour, comments in another, strings in another, and so on. As a beginner programmer, most of your errors to fix in the first programs you write will be syntax errors, and this will mean you spot many of them immediately while you are typing, If you make a typo, the things you type show up in the wrong colour - "black instead of blue - Ah - a typo!". It's a great time saver and will make the learning process much more fun.

Then, it is useful to get an IDE (Integrated Develpment Environment) that lets one edit the code, run it, and step through it in a debugger within the same application - that saves a lot of time - however it isn't needed perhaps for ones early programs.

I can only really comment on tools for c programming. The one I use is Microsoft Visual C++ - suitable for experienced programmers who already know that they will be using Windows C or C++. There is a free version for hobbyists - however it doesn't include a resource editor which is a bit of a drawback in a GUI program.

Others use Borland C++ which is the other main commercial C compiler - I don't happen to have used it myself.

I've recently come across Ultimate++ which comes with a very nice looking IDE - and is completely free - with a new more thoroughly object orientated approach to windows C - can also be used to compile standard windows C / C++ programs - however I've not tested it much as of writing this.

The rest of this is a bit out of date. You may like to look at the Wikipedia article on IDEs. and the comparison of IDEs

If you want free tools, you can get a free programmer's text editor for c with syntax colouring on this page Freeware Home >> Programming >> Editors. I've had a look at UniRed and first impressions are that it is rather nice but I haven't tested any other tools apart from Visual C++ at all thoroughly.

Look for shareware ones in this Google directory listing.

If you go for free tools, you need a compiler as well of course. LCC is free, comes complete with IDE with syntax colouring, and can compile Windows programs. It's a compiler for C only, not yet for C++. (there's a paid version as well on CD, or with additional examples, or if one wants the compiler source code).

I've tested LCC a little, and it works fine, with a number of nice features. It can open and edit resource files too. If you call a function that isn't in your project or any of it's library modules, it will search through all the Windows libraries to see if it can find it, and list any that have it and offer to add it in - very nice!

One thing I notice in the documentation but haven't tried yet is that it has support for arbitrarily large numbers ("Big numbers"), which will be a nice feature for some microtonal lattice work - you can get pretty large numbers by taking repeated powers of 3/2 etc.

Bloodshed is another one that you can get for free, this time for C / C++. The compiler is called Dev-C++

If all you want to do is to compile console mode apps in plain c, GCC is fine, which you can get from the djgpp home page. Read the install instructions - you need to modify your autoexec.bat file and add a couple of lines to it - apart from that, it's just a matter of unzipping it - the install is easy). This would be fine to use e.g. to work through Kerningham and Richie

Djgpp can compile windows programs, but apparently you may need to get quite technical about it to do that. The FAQ for GCC itself recommends LCC as one of several for Windows C, and mentions particularly that it is easy to use.

Your programmer's editor may let you run a compiler directly from within the program. Or, you can run gcc from the command line using this type of syntax, which is fine for ones first few programs:.

gcc -o hello.exe "hello world.c"

then you'd type


to run your program. For comand line work, it's useful to install Doskey so that you can go back to repeat a previous command using the up arrow. You do that by adding the line


to your autoexec.bat . You can edit this file most quickly in Windows from Start | Run | msconfig .

If you use UniRed, and gcc, you can add these lines to UniRed\compile\c.ini to help with compiling your first c programs.

[compile with gcc]
cmd=gcc -o "%name%.exe" "%file%"
[run compiled program]

How do I sell my programs?

Finally, if you want to sell your programs - for advice, see the Association of Shareware Professionals - they also developed the pad file system which makes it far easier to submit your program to download sites. That site also has a useful list of over 300 shareware / freeware sites to submit your program too. Most of those will automatically list any program you provide, though some do review them first. Then with all those forms to submit your program, it's useful to get something like Roboform to fill them all in - this has a special App upload section. Or use one of the specialist submission programs for software authors such as RoboSoft. You will also want to make Pad files for your program for the sites that accept them - saves a lot of form filling - that is easy to do too, and explained on the ASP site.

There are many software agents nowadays. Two I use include Reg Now - many shareware authors use them and they are well established in the field - and Plimus - particularly easy to configure and integrate the order page with your web site. There are several other major resellers of software too, that's just the one I use.

I recommend Armadillo for making unlock keys and protecting your program from Crackers - don't think your program won't be cracked just because it has a specialist audience who would have no interest in cracking it. There are many crackers who are keen to find the unlock key for any program that gets published, and not enough programs to go round apparently. Any newly posted program on the large download sites will attract their attention within a couple of days. They do it just for the fun and the challenge - but then publish their results for other crackers to see to prove they did it - and then these get widely distributed by others. Armadillo is one of many systems used to protect programs. I can recommend it because I use it myself, and know it works well and haven't needed to look for anything else. You'll need to ask others to find out about the other approaches.

A few programmers earn a reasonable amount from shareware, but many earn rather little - think how many programs one downloads and what percentage of them one buys - well many windows users anyway buy a rather small percentage of the ones they try. It would be no surprise if only one in 5000 or less of those who download your program ever register it, though with some particularly successful programs the figure there can be as high as 2 or 3 percent I've been told. So your site will need lots of visitors, or your program will need to be mentioned in many places!

If you have many downloads but still get no sales (e.g. downloads into the tens of thousands with no sales), does if it has any serious bugs that interfere with the flow of work? Or is it hard to install in any way? Or can your users figure out how to use it after they install it? Or are there perhaps many other programs that do similar things? Those are all things that have affected my own programs from time to time.

Sometimes there is little point in increasing the number of downloads until you improve the program. Pay attention to your users. Well that's my motto anyway. Not that I'm particularly successful yet myself. Perhaps I should be the one asking this question :-)

For music programs, try submitting them to Harmony Central and Shareware Music Machine.

Personal tools
How to use the wiki