Help for Tune Smithy
FAQ - How to play a keyboard in alternate tunings
From Tune Smithy
|Line 1:||Line 1:|
This is a bit complicated, sorry.
This is a bit complicated, sorry.
Revision as of 22:29, 21 November 2009
I've made this page in reply to Steve Grainger's forum post - this is something of a FAQ with users of my programs. Please visit the forum to comment on it - or you can join the wiki and edit this page.
This is a bit complicated, sorry.
The different tuning methods
You have tuning tables, or pitch bend retuning.
This is the most flexible and would be brilliant if there only could be a single standard that worked with all synths. But unfortunately there isn't so it is tricky to use.
The nearest to a standard for retuning in MIDI is the MTS sysex - but though it is a good standard, unfortunately few synths support it, they nearly all have their own custom tuning methods. Then a newer standard is the .TUN table which some synths support.
Pitch bend retuning
Most synths and soft synths let you do the pitch bend retuning. If done properly you can get good quality sounds with no pitch glitches at all for quite demanding microtonal music.
Not all synths work though. Some don't let you bend the pitch of a note at all. Some do let you retune but use non standard pitch bend ranges such as two octaves or one semitone instead of the standard of +- a twelve equal whole tone - these can be used you just need to set up Tune Smithy to work with the desired pitch bend range.
Also some will only let you use one pitch bend at a time while others let you have up to sixteeen different pitch bends, one for each channel. The ones that only let you use one pitch bend at a time can only be used to play monophonic microtonal music - though they become more flexible if you are able to run several of them at once simultaneously and route a different midi channel to each one.
To help with the pitch bend retuning, I added the various Wizards you find in the Out menu in Tune Smithy and the Play menu in Bounce Metronome Pro - to test the capabilities of your synth to see what it can do.
How to do the retuning
The quickest way to get started with it may be to use the PC Keyboard player.
If you have a midi controller keyboard or synth you can also hook that up to the computer to play soft synths or put Tune Smithy into the loop to retune a hardware synth. music keyboard retuning
For the tuning tables, I only have support for the MTS sysexes so far but may later add other types of tuning table when I return to work on Tune Smithy.
I'll be returning to this hopefully some time next spring, to work on the midi keyboard retuning and pc keyboard player in FTS amongst other things. At the moment I'm still working on Bounce Metronome Pro but the various improvements I've done there will help with Tune Smithy when I return to it.
Anyway meanwhile if you have a synth that needs tuning tables then your best bet may be to use the Scala software to retune it. It can retune nearly all hardware synths, so I've heard.
You get it here: Scala home page
I've done a web page with help about how to work with some particular soft synths here:
What counts as "good quality" is something that depends very much on the individual. Amongst users of my software, I find that some want a "pure sound" for instance, and either want pure tones like sine wave, triangle wave etc, or are interested in the various types of synthesizer sound. Others are more interested in sounds that are as close as possible to the sound of the "real instruments" - these tend to be not quite so steady and pure in pitch as the synthesized type sounds - they often have a small amount of vibrato in string sounds for instance even with the modulation set to 0 - but they sound very nice indeed.
But anyway whatever your taste, there's no doubt that with a modest laptop you can make good quality recordings of microtonal music. If you want sounds like real orchestral instruments, then you would want to investigate the various "virtual orchestras" and sample players such as GPO and Giga.
For synthesizer type sounds then you may want to look into the FM synths, and VST plug ins. If you haven't got a VST host then a good free one is Cantabile lite - this expands the repertoire of sounds with a wide range of plug ins.
For pure sine waves, triangle waves, and other interesting waveform based instruments, you can use the Waveform Player that comes with Bounce Metronome Pro and Tune Smithy. These are particularly useful if what you want to do is to hear the fine nuances of just intonation chords clearly, or count beats etc.
The various contributions to the sound quality
Laptop speed - any laptop made in the last ten years or so is fast enough to do a fair amount of polyphony on most soft synths and samplers.
Laptop noise - you may find the laptop makes a bit of sound, seldom completely silent, so it is a matter of taste there, whether the sound of the laptop is something that bothers you. If it is then the only real solution is to get a laptop that is quieter - or you can do things like put the laptop next door and listen to it over a long cable, or cover it up and sound proof it in various ways (obviously taking care that it is cooled efficiently). As far as making recordings is concerned, then there are two ways to do it - either play the sounds over loudspeakers and then record on a microphone - or more commonly, you do the recording entirely within the computer.
When recording within the computer again, one way is to make a midi clip and then render it to audio e.g. with Audacity or the Roland Sound Canvas or similar software that lets you convert a midi file to a wav file. With this then it doesn't matter what the soundcard is like except for listening to the result. The audio file you make is of perfect quality as it is rendered directly to a file and never needs to be "recorded" as such.
Another way is to record in real time as the sound is played. For this, the quality of the soundcard does matter, the better the soundcard then the less noise and the more faithfully the waveform is reproduced.
The speed of the laptop doesn't affect the quality of the recording unless it is so slow that you get drop outs (these can be clicks or gaps of silence or white noise in the recording or audio that repeats a bit like a stuck groove on an LP - or notes not sounding at all because there wasn't enough computer speed to play the notes). Anyway unlikely you get those issues unless there are many notes played simultaneously, you are likely to find that your laptop is plenty fast enough at least to start with until you get to really demanding pieces.