Help for Tune Smithy Koch snowflake icon.gif

Tutorials:Fractal tunes

From Tune Smithy

(Difference between revisions)
Jump to: navigation, search
(Pieces with no strong melodic focus)
(A brief introduction to musical instruments and instrumentation for newbies)
 
(21 intermediate revisions not shown)
Line 1: Line 1:
[[Fractal Composer and Player | Up to Task help]] - [[Tutorials | Up to Tutorials]]
[[Fractal Composer and Player | Up to Task help]] - [[Tutorials | Up to Tutorials]]
 +
 +
WORK IN PROGRESS
==Intro==
==Intro==
Line 37: Line 39:
You can probably see or hear how the same basic pattern is used over and over again in each bar (the step sizes change a little but the pattern of steps up and down remains the same). It's less immediately obvious, but the way the seed phrases are put together - the way the tune goes up and down from one bar to the next - also follows the same pattern. The same pattern is then used again and again at larger and larger time scales to build up the entire tune.
You can probably see or hear how the same basic pattern is used over and over again in each bar (the step sizes change a little but the pattern of steps up and down remains the same). It's less immediately obvious, but the way the seed phrases are put together - the way the tune goes up and down from one bar to the next - also follows the same pattern. The same pattern is then used again and again at larger and larger time scales to build up the entire tune.
-
The method used to construct the tune is simple (conceptually anyway), yet the tune still has the capacity to surprise, as it repeats at larger and larger time scales at different pitches.  
+
The method used to construct the tune is simple (conceptually anyway), yet the tune still has the capacity to surprise, as it repeats at larger and larger time scales at different pitches.
 +
 
 +
For more about how the tunes are constructed, see [http://robertinventor.com/software/tunesmithy/tune_smithy_sloth_canons.htm Sloth Canons]and [http://robertinventor.com/software/tunesmithy/tune_smithy_seeds.htm Seeds and Fractals].
===Comparison with fractal landscapes===
===Comparison with fractal landscapes===
Perhaps some of you have enjoyed making fractal landscapes, using programs such as [http://en.wikipedia.org/wiki/Terragen Terragen]. An entire landscape can be constructed from a randomly generated fractal texture, by varying some user set parameters.  
Perhaps some of you have enjoyed making fractal landscapes, using programs such as [http://en.wikipedia.org/wiki/Terragen Terragen]. An entire landscape can be constructed from a randomly generated fractal texture, by varying some user set parameters.  
-
 
-
This is the sort of thing you can make straight away with [http://www.planetside.co.uk/terragen/ Terragen as downloaded], with no plug ins or extra effects:
 
-
[[Image:terragen_ex.jpg]]
 
-
 
-
Then you can add various effects such as different types of terrain etc.
 
For many examples, see [http://www.planetside.co.uk/gallery/f/tg09 Terragen Images Gallery]
For many examples, see [http://www.planetside.co.uk/gallery/f/tg09 Terragen Images Gallery]
-
 
-
Fractal landscape [http://en.wikipedia.org/wiki/Image:Landbyriver.jpg made in Terragen]  (public domain image by Robert Kleinberg)::
 
-
 
-
[[Image:Landbyriver.jpg]]
 
-
 
-
Fractal music programs such as Tune Smithy let you work with tunes in a similar fashion. You can make an entire tune, continuing endlessly, with perhaps many instruments playing at once, just by setting various parameters.
 
There are many types of '''''fractal music'''''. For some sites to visit to get an idea of the range of work that is done in this field, see the [http://thinks.com/webguide/fractal-music.htm Thinks.com Fractal Music page].
There are many types of '''''fractal music'''''. For some sites to visit to get an idea of the range of work that is done in this field, see the [http://thinks.com/webguide/fractal-music.htm Thinks.com Fractal Music page].
Line 72: Line 65:
===If you change the seed and other parameters, the entire tune changes===
===If you change the seed and other parameters, the entire tune changes===
-
Most of the tunes you make with Fractal Tune Smithy are based on a '''''musical seed phrase of a few notes'''''. Change the seed, or change how the tune is built, or how instruments are selected to play the notes, and the whole tune changes.
+
Change the seed phrase, or change how the tune is built, or how instruments are selected to play the notes, and the whole tune changes. That's because of the way the seed phrase is used for the construction of the tune at larger and larger time scales. You can hear this quite easily with a few of the simpler tunes such as some of the ones in 1.082a and 1.082b drop lists.
 +
 
 +
Try for instance {{fractaltune|1.082b/ascending_above_the_clouds}}. You can probably hear the same seed phrase played over and over again at different speeds to construct the tune. In other tunes it is much harder to hear. T
 +
 
 +
In fact, most of the tunes, because of the fractal construction used, take the form of [http://en.wikipedia.org/wiki/Canon_(music)#Mensuration_and_tempo_canons augmentation, or sloth canons], with exactly the same tune played simultaneously at many different tempi. You can easily hear this too in the {{fractaltune|1.082b/ascending_above_the_clouds}} tune, and some of the other earlier ones.  
-
This happens because of the way the musical seed is used for the construction of the tune at many time scales simultaneously. You can hear this quite easily with a few of the simpler tunes such as some of the ones in 1.082a and 1.082b drop lists (e.g. {{hiu|ascending above the clouds}}). In the more complex tunes, it is much harder to hear this, or even pick out the seed phrase at all sometimes. The various parameters can interact in complex ways, and the instruments often pick out lines in the texture which you can't easily relate to the original seed.  
+
To hear the sloth canon, mute all except the first part. Listen to the tune. Then mute all except the second part and play the tune a bit faster and you should hear exactly the same tune as before (possibly at a different pitch). You can repeat this for each part - {{hiu|ascending above the clouds}} is a strict [http://en.wikipedia.org/wiki/Canon_(music)#Mensuration_and_tempo_canons sloth canon].
-
In fact, most of the tunes, because of the fractal construction used, take the form of [http://en.wikipedia.org/wiki/Canon_(music)#Mensuration_and_tempo_canons augmentation, or sloth canons], with exactly the same tune played simultaneously at many different tempi. You can easily hear this too in the {{hiu|ascending above the clouds}} tune, and some of the other earlier ones. Mute all except the first part. Listen to the tune. Then mute all except the second part and play the tune a bit faster and you should hear exactly the same tune as before (possibly at a different pitch). You can repeat this for each part - {{hiu|ascending above the clouds}} is a strict [http://en.wikipedia.org/wiki/Canon_(music)#Mensuration_and_tempo_canons sloth canon].
+
However don't expect to hear the canon in the more complex tunes. The instrumentation and other parameters (especially the chord progressions) may disguise it so that it is hard to hear, or impossible to pick out at all. It is the basis for the construction nevertheless.  
-
Again in the more complex tunes, the instrumentation and other parameters (especially the chord progressions) may disguise the canon so that it is hard to hear, or impossible to pick out at all, but it is the musical basis for the construction nevertheless. The tunes are also related to an intricate visual pattern called the [http://en.wikipedia.org/wiki/Koch_snowflake Koch snowflake fractal]. In fact, the icon for Tune Smithy (which you can see as the icon for this wiki too) is a Koch snowflake. If you want to explore these connections, see:
+
The tunes are also related to an intricate visual pattern called the [http://en.wikipedia.org/wiki/Koch_snowflake Koch snowflake fractal]. In fact, the icon for Tune Smithy (which you can see as the icon for this wiki too) is a Koch snowflake. If you want to explore these connections, see:
[[Seeds_and_fractals]]
[[Seeds_and_fractals]]
Line 102: Line 99:
== How to save your work ==
== How to save your work ==
-
It is especially important to save fractal tunes, and to use the correct format to save them. If you make a fractal tune you particularly like, even if you remember how it went, or have an audio recording of it, it can be very hard indeed to reconstruct it unless you know the parameters that were used to make the tune. If you use the more complex construction methods, e.g. formulae, then it is for all practical purposes impossible (I know of no automatic way to recover the parameters used to make the tune from a recording of the result).
+
It is especially important to save fractal tunes, and to use the correct format to save them. So before we start the tutorial, you should know how to save your work. Then, if you make something you particularly like in the tutorial, you will know how to save it.
-
So before we start the tutorial, you should know how to save your work. Then, if you make something you particularly like in the tutorial, you will know how to save it.
+
If you make a fractal tune you particularly like, even if you remember how it went, or have an audio recording of it, be sure to save it as a fractal tune as well. It can be very hard indeed to reconstruct it unless you know the parameters that were used to make the tune. I know of no automatic way to recover the parameters used to make the tune from a recording of the result, and for the more complex tunes, e.g. ones using formulae, it may well be for all practical purposes impossible.
===Save as Tune Smithy Fractal Tunes===
===Save as Tune Smithy Fractal Tunes===
Line 118: Line 115:
== First exercise, vary the seed ==
== First exercise, vary the seed ==
-
In our first exercise, we investigate the way in which the tune varies as you change the seed. Start up the fractal tune player - from your desktop shortcut - or look for Player in your Tasks for Tune Smithy folder.
+
In our first exercise, we discover how the tune varies as you change the seed. Start up the fractal tune player - from your desktop shortcut - or look for Player in your Tasks for Tune Smithy folder.
Select any tune from the drop list of fractal tunes (circled in red below).  
Select any tune from the drop list of fractal tunes (circled in red below).  
Line 126: Line 123:
Now select a seed for one of the other tunes, from the drop list of seeds (circled in blue). Notice how this changes the entire tune for all the instruments.  
Now select a seed for one of the other tunes, from the drop list of seeds (circled in blue). Notice how this changes the entire tune for all the instruments.  
-
Now try editing the numbers for the seed. Keep the first number as it is (usually 0) and change one of the other numbers. You can do this while the tune is still playing.  
+
Now try adjusting individual numbers for the seed. Keep the first number as it is (usually 0) and change one of the other numbers. You can do this while the tune is still playing.  
Or - do this using {{w76}}, click on any of the tune notes in the seed numbers area of this window, and drag up and down:
Or - do this using {{w76}}, click on any of the tune notes in the seed numbers area of this window, and drag up and down:
Line 152: Line 149:
You can change the seed for the tune using the main window seeds drop list, or {{w76}} or {{w77}}
You can change the seed for the tune using the main window seeds drop list, or {{w76}} or {{w77}}
-
You can also make new seeds with the Mouse & PC keyboard Player using {{w3}} - see [Seeds.htm#Making_new_seeds_for_the_melody <font color="#0000FF"><u>Make new seed</u></font>], also from a music keyboard if you have those - see [Seeds.htm#Making_new_seeds_from_midi_keyboard Make new seed from Music Keyboard].
+
You can also make new seeds with the Mouse & PC keyboard Player using {{w3}} - see [Seeds.htm#Making_new_seeds_for_the_melody {{hib|<u>Make new seed</u>}}], also from a music keyboard if you have those - see [Seeds.htm#Making_new_seeds_from_midi_keyboard Make new seed from Music Keyboard].
 +
 
 +
==Second Exercise - Vary the Intrumentation==
 +
 
 +
The fractal tune is made up of different parts, and you can change the instrument for each part separately.
 +
 
 +
To change the instrument for a part, highlight the part you want to change in the Parts window Ctrl + 9. You can then change the instrument using the Instruments Menu... (Ctrl + 8) - this changes the  instrument for the highlighted part. You can also use Percussion... (Ctrl + 21) for any part, and the Wave Shape Player Instruments (Ctrl + 196).
 +
 
 +
Or type the instrument name into the text  field at the bottom of the list of instruments in the Parts window - recognises fragmentary names and you'll see the instrument change as you type.
 +
 
 +
N.B. the instruments menu will show check marks for all the instruments used in any of the parts. But if you click on the menu you set the instrument for just the part highlighted in the Parts window. Sorry this is a bit confusing when you want to change an instrument you can hear in the tune and don't know what part it is. Start with the Parts window and everything should be clearer. Will do something about it in FTS 3.2. when ready.
==Instruments==
==Instruments==
-
Seasoned composers and musicians can skip the next couple of sections - a gentle start is needed, since you don't have to be a trained musician to use Fractal Tune Smithy to make fractal tunes - any more than you need to be a trained artist to make fractal art.  
+
Seasoned composers and musicians can skip the next couple of sections. It is meant as a gentle start for complete newbies to instrumentation. You don't have to be a trained musician to use Fractal Tune Smithy to make fractal tunes - any more than you need to be a trained artist to make fractal art.  
If you are a newbie to orchestration - this next section is for you.
If you are a newbie to orchestration - this next section is for you.
Line 171: Line 178:
===Several instruments in unison===
===Several instruments in unison===
-
Try out some of the instruments in the Custom multi-instrument voices menu. Most of them consist of several instruments that play the same tune, in unison, or at octaves (sometimes other intervals and some are more complex than that).
 
-
This is a very common composition technique. Many folk musicians play the same tune in unison, apart maybe from the harp or piano which plays chords. In the orchestra, composers often double up instruments for effect, e.g. flute + oboe etc. The instruments, though you can hear them separately too, blend together to make a new sound.
+
Try the instruments in the {{hi|Custom}} drop menu in {{w8}}. For instance Flute + Oboe, Bassoon + violin etc. Some of the combinations in this drop list are orthodox, some rather unusual. Most of them consist of several instruments that play the same tune, in unison, or at octaves. Some use other intervals or are more complex.
 +
 
 +
This is a common composition technique. Many folk musicians play the same tune in unison, apart maybe from the harp or piano which plays chords. In the orchestra, composers often double up instruments for effect, e.g. flute + oboe etc. The instruments blend together to some extent to make a new sound for the tune.
 +
 
 +
To make your own custom instruments like these, go to {{w37}} and select one of the example custom multi instrument voices. Then use {{hi|Copy Voice}}. Go down and give your new custom voice a name in the {{hi|Name for custom voice}} field. Then highlight one of the instruments and use {{hi|Edit Instr.}} This brings up {{w44}}. You can then select another instrument using {{w8}}. When you work with {{w44}} or {{w37}} your instrument selections in {{w8}} change the instrument for the highlighted instrument in {{w37}}. If you want one of the instruments to be transposed, or vary its volume compared with the other instruments in your voice etc you can do this with {{w44}}.
 +
 
 +
Repeat for all the instruments for your new voice. Add or delete instruments if necessary in  {{w37}}. You should find your new custom voice gets added to the {{hi|Custo}} drop menu in {{w8}} and you can then use it in your fractal tunes.
===Multi-part music===
===Multi-part music===
Line 205: Line 217:
* Brass - trumpet, trombone etc.  
* Brass - trumpet, trombone etc.  
-
The Cor Anglais, or French Horn as it is otherwise known, despite the name, is actually a type of oboe so counts as a woodwind instrument.
+
The Cor Anglais, or English Horn as it is otherwise known, despite the name, is actually a type of oboe so counts as a woodwind instrument.
The {{w8}} menu is grouped using the families of the [[General Midi]] specification. This is a standard arrangement assumed by nearly all the midi clips you find on the internet use - but it has its eccentricities. E.g. the ethnic classification (why is the koto instrument is counted as ethnic rather than strings - when the Shakhuachi, which is often played along with koto - is counted as a wind instrument rather than ethnic?).  
The {{w8}} menu is grouped using the families of the [[General Midi]] specification. This is a standard arrangement assumed by nearly all the midi clips you find on the internet use - but it has its eccentricities. E.g. the ethnic classification (why is the koto instrument is counted as ethnic rather than strings - when the Shakhuachi, which is often played along with koto - is counted as a wind instrument rather than ethnic?).  
Line 285: Line 297:
==A quick way to build up a fractal tune one voice at a time==
==A quick way to build up a fractal tune one voice at a time==
-
Start with <font color="#FF8000">'''File | New '''</font>. Choose which instrument you want for the first part from the <font color="#FF8000">'''Voices '''</font>menu. Now make sure you have <font color="#FF8000">'''Voices | Auto Sel Las '''</font>t selected. Increase the <font color="#FF8000">'''Number of Parts to play '''</font>one at a time, and each time select a voice from the <font color="#FF8000">'''Voices '''</font>menu until you have the number of parts in play as desired - you can do all this while the tune is playing. Then transpose the parts as desired by showing the <font color="#FF8000">'''Parts '''</font>window and using the <font color="#FF8000">'''Octave Shift '''</font>column as usual. If you want to transpose the entire tune up or down - all the parts at once - use the <font color="#FF8000">'''Pitch '''</font>window.
+
Start with {{hi|File <nowiki>|</nowiki> New }}. Choose which instrument you want for the first part from the {{hi|Instr.}} menu. Now make sure you have {{hi|Instr. <nowiki>|</nowiki> Auto Sel Last}} selected. Increase the {{hi|Number of Parts to play }}one at a time, and each time select a voice from the {{hi|Instr.}} menu until you have the number of parts in play as desired - you can do all this while the tune is playing. Then transpose the parts as desired by showing the {{w9}} window and using the {{hi|Octave Shift }}column as usual. If you want to transpose the entire tune up or down - all the parts at once - use the {{w10}} window.
==Moving the tune from one instrument to another, and hocketing==
==Moving the tune from one instrument to another, and hocketing==
-
Show the [[Window 9 | Parts]] window. Then look at the Order of Play menu., and see what you have selected there. If this is a new tune, then you'll find it shows <font color="#FF8000">'''By Layer '''</font>. You can hear this in the [1.082b/oboe_and_friends.ts oboe and friends] fractal tune. The tune continues normally in the top line, but the start of every seed that begins a new seed at a higher layer gets played by one of the other instruments instead of the oboe. You get this kind of syncopated effect with the oboe often missing the first note of its seeds. So, try that out to hear what it sounds like with your instrumentation.
+
Show the [[Window 9 | Parts]] window. Then look at the {{hi|Order of Play}} menu, and see what you have selected there. If this is a new tune, then you'll find it shows {{hi|By Layer}}. You can hear this in the {{fractaltune|1.082b/oboe_and_friends}} fractal tune. The tune continues normally in the top line, but the start of every seed that begins a new seed at a higher layer gets played by one of the other instruments instead of the oboe. You get this kind of syncopated effect with the oboe often missing the first note of its seeds. So, try that out to hear what it sounds like with your instrumentation.
-
Many of the fractal tunes use the next selection in this list, <font color="#FF8000">'''By layer with simultaneous notes '''</font>Try that instead - you will find the first part plays all its notes, accompanied by the second part playing the same tune,but more slowly - now the extra notes played by the ohter parts get sustained all the way to the next note for that part. And so on - you'll hear a canon by augmentation in fact with your chosen instruments, as explained in [howthe.htm How the seeds build up to make tunes].
+
Many of the fractal tunes use the next selection in this list, {{hi|By layer with simultaneous notes }}Try that instead - you will find the first part plays all its notes, accompanied by the second part playing the same tune,but more slowly - now the extra notes played by the other parts get sustained all the way to the next note for that part. And so on - you'll hear a canon by augmentation in fact with your chosen instruments, as explained in [[Seeds and fractals]] and [[Endless Canons]].
Okay, that's pretty nice, many of the tunes use it. However, let's explore the other options here.
Okay, that's pretty nice, many of the tunes use it. However, let's explore the other options here.
-
<font color="#FF8000">'''. By Note height '''</font>- the same note in the arpeggio always gets played by the same instrument. <font color="#FF8000">'''By time '''</font>- the tune just cycles round amongst the instruments, each playing one of the notes in turn. <font color="#FF8000">'''Cummulative note height '''</font>is a more complex way of assigning notes to the instruments. Anyway the general idea is that the tune gets broken up by being assigned to each instrument in turn. This is known as hocketting. See the help for this window for a little about those options: [User_guide2.htm#Order_of_play_menu Order of play menu].
+
{{hi|By Note height}} - the same note in the arpeggio always gets played by the same instrument. {{hi|By time}}- the tune just cycles round amongst the instruments, each playing one of the notes in turn. {{hi|Cummulative note height}} is a more complex way of assigning notes to the instruments. Anyway the general idea is that the tune gets broken up by being assigned to each instrument in turn. This is known as hocketting. See the help for this window for a little about those options: [User_guide2.htm#Order_of_play_menu Order of play menu].
-
Try those various options - then try the <font color="#FF8000">'''Other '''</font>option. This lets you make up your own combinations of the other options. Actually, you don't need to try to keep track of what the formula will do. Just enter some formula using the various letters such as <font color="#0080FF">'''t+m+h '''</font>or <font color="#0080FF">'''N+H+L '''</font>or whatever, and see what happens. You can try it out with any of the pieces. There are various other options in this window to explore - see it's help [User_guide2.htm#Order_of_Play_Other Order of play | Other]. The option to <font color="#FF8000">'''Sustain all notes to next note for same part '''</font>can be used to get several parts playing together.
+
Try those various options - then try the {{hi|Other }}option. This lets you make up your own combinations of the other options. Actually, you don't need to try to keep track of what the formula will do. Just enter some formula using the various letters such as {{hiu|t+m+h }}or {{hiu|N+H+L }}or whatever, and see what happens. You can try it out with any of the pieces. There are various other options in this window to explore - see it's help [User_guide2.htm#Order_of_Play_Other Order of play <nowiki>|</nowiki> Other]. The option to {{hi|Sustain all notes to next note for same part }}can be used to get several parts playing together.
-
Also at this point one could also digress to explore <font color="#FF8000">'''Bs | Seeds Options | Seed pos increment '''</font>as well, perhaps with <font color="#FF8000">'''By layer with simultaneous notes '''</font>- see the help for that window for some informatin about what it does - main effect is you get more notes played in the second and third parts, and a somewhat more complex texture to the fractal tune. One could also try the polyrhythm tunes too - many other things too, but I'll leave those for later FAQ entries on this page. Now, let's go on to the tuning of the notes - the really fun part in my (slightly biased probably) opinion.
+
Also at this point one could also digress to explore {{hi|Bs <nowiki>|</nowiki> Seeds Options <nowiki>|</nowiki> Seed pos increment }}as well, perhaps with {{hi|By layer with simultaneous notes }}- see the help for that window for some informatin about what it does - main effect is you get more notes played in the second and third parts, and a somewhat more complex texture to the fractal tune. One could also try the polyrhythm tunes too - many other things too, but I'll leave those for later FAQ entries on this page. Now, let's go on to the tuning of the notes - the really fun part in my (slightly biased probably) opinion.
==Tuning==
==Tuning==
Line 305: Line 317:
For this exercise, choose any of the fractal tunes, or one you built up from new in the previous exercises, and try changing the scale from the scales drop list.
For this exercise, choose any of the fractal tunes, or one you built up from new in the previous exercises, and try changing the scale from the scales drop list.
-
As a general guide, ones with fewer notes in them are easier to use, and five or seven or there abouts is enough to have an interesting variety of intervals for the melody, and few enough notes so that nearly everything you play will be nice. Try twelve tone scales with the <font color="#0080FF">'''pentatonic '''</font>or <font color="#0080FF">'''diatonic '''</font>modes (in the <font color="#FF8000">'''Arpeggios '''</font>drop list) - and the minor scales. Then have a look at the other modes for the twelve tone scale (by a mode here I mean a selection of notes from the scale), e.g. the 5 note modes, which you get to from the <font color="#FF8000">'''Arpeggios '''</font>drop list for the twelve tone scales..
+
As a general guide, ones with fewer notes in them are easier to use, and five or seven or there abouts is enough to have an interesting variety of intervals for the melody, and few enough notes so that nearly everything you play will be nice. Try twelve tone scales with the {{hiu|pentatonic }}or {{hiu|diatonic }}modes (in the {{hi|Arpeggios }}drop list) - and the minor scales. Then have a look at the other modes for the twelve tone scale (by a mode here I mean a selection of notes from the scale), e.g. the 5 note modes, which you get to from the {{hi|Arpeggios }}drop list for the twelve tone scales..
If you find the tune goes rather high or low, you can set a range for each part using [[Window 22 | Note Ranges]] window. To set the range for several parts at once, highlight all the ones you want to change. The scroll bars shift the bounds of the range by semitones, tones, or the scroll bar below the note number shifts it up / down by octaves.
If you find the tune goes rather high or low, you can set a range for each part using [[Window 22 | Note Ranges]] window. To set the range for several parts at once, highlight all the ones you want to change. The scroll bars shift the bounds of the range by semitones, tones, or the scroll bar below the note number shifts it up / down by octaves.
-
If you would like an introduction to the various twelve tone systems in the <font color="#FF8000">'''Scales '''</font>drop list at this point, have a look through [#histtuning How do I play the historical tunings of the diatonic and twelve tone systems?] which will get you started. Also have a look through the [Scales_and_Fractal_Tunes.htm <font color="#000000">Musical note intervals</font>] page for some of the background and theory for them. But, you don't need to know all that to have fun with them - it is just for those who find such things of interest, and kind of useful eventually to know in the long run I expect.
+
If you would like an introduction to the various twelve tone systems in the {{hi|Scales }}drop list at this point, have a look through [[histtuning | How do I play the historical tunings of the diatonic and twelve tone systems?]] which will get you started. Also have a look through the [[Musical note intervals]] page for some of the background and theory for them. But, you don't need to know all that to have fun with them - it is just for those who find such things of interest, and kind of useful eventually to know in the long run I expect.
-
You'll see there are many other scales apart from teh twelve tone ones. Try the <font color="#0080FF">'''Pygmie '''</font>and Koto scales, which are very tuneful, also the Slendro and Pelog which are really interesting and unusual (to the Western ear - these are scales typical of those used in Indonesia). Try the Thailand scale too, which is close to seven equal temperament (seven equally spaced notes to an octave). Generally, try the ones with fewer notes first.
+
You'll see there are many other scales apart from thtwelve tone ones. Try the {{hiu|Pygmie }}and Koto scales, which are very tuneful, also the Slendro and Pelog which are really interesting and unusual (to the Western ear - these are scales typical of those used in Indonesia). Try the Thailand scale too, which is close to seven equal temperament (seven equally spaced notes to an octave). Generally, try the ones with fewer notes first.
-
Also be sure to have a go with the harmonic series. This is the series of notes you get in the partials (component frequencies of the note) of many "harmonic" timbres such as voice or string, woodwinds - most of the instruments of the orchestra in fact. The result is that the notes of the harmonic series go well together. See [harmonic_series_notes_sound_well_together.htm <font color="#400040">Why two notes of the harmonic series sound well together </font>]
+
Also be sure to have a go with the harmonic series. This is the series of notes you get in the partials (component frequencies of the note) of many "harmonic" timbres such as voice or string, woodwinds - most of the instruments of the orchestra in fact. The result is that the notes of the harmonic series go well together. See [harmonic_series_notes_sound_well_together.htm {{null|Why two notes of the harmonic series sound well together }}]
-
For a really unorthodox one try the <font color="#0080FF">'''Bohlen-Pierce '''</font>one - that one should have 3/1 (octave plus a fifth) instead of 2/1 (octave) as the "octave". So in the <font color="#FF8000">'''Parts '''</font>window, change the drop list to read <font color="#0080FF">'''Modulate by (interval) '''</font>and to transpose instruments up / down, use <font color="#0080FF">'''3 '''</font>or <font color="#0080FF">'''1/3 '''</font>or <font color="#0080FF">'''9 '''</font>or <font color="#0080FF">'''1/9 '''</font>if you want them to go up and down by two "octaves".
+
For a really unorthodox one try the {{hiu|Bohlen-Pierce }}one - that one should have 3/1 (octave plus a fifth) instead of 2/1 (octave) as the "octave". So in the {{hi|Parts }}window, change the drop list to read {{hiu|Modulate by (interval) }}and to transpose instruments up / down, use {{hiu|3 }}or {{hiu|1/3 }}or {{hiu|9 }}or {{hiu|1/9 }}if you want them to go up and down by two "octaves".
-
For some more small scales to try go to <font color="#0080FF">'''Scales | More Scales '''</font>drop lists - then the <font color="#0080FF">'''Woodstock windchimes scale '''</font>there is really nice, and also the selection of pentatonic scales labelled " <font color="#0080FF">'''Canright's exs from Superparticular Pentatonics '''</font>", and " <font color="#0080FF">'''Canright's Some pentatonics I have known '''</font>".
+
For some more small scales to try go to {{hiu|Scales <nowiki>|</nowiki> More Scales }}drop lists - then the {{hiu|Woodstock windchimes scale }}there is really nice, and also the selection of pentatonic scales labelled " {{hiu|Canright's exs from Superparticular Pentatonics }}", and " {{hiu|Canright's Some pentatonics I have known }}".
-
If you want to be a bit more unorthodox, take some normal type of pentatonic scale like the woodstock windchimes <font color="#0080FF">'''5/4 4/3 3/2 5/3 2/1 '''</font>, then change one of the intervals to an exotic one like 11/8, 11/9, 13/8, or some other one using the eleventh or thirteenth or higher prime harmonics. Maybe in this case leave the 3/2 as a kind of grounding thing, so how about <font color="#0080FF">'''5/4 11/9 3/2 13/8 2/1 '''</font>or something. Just to get an idea of what those types of intervals sound like in a scale - and if you like it, as usual, save the result for future reference. Sometimes adding just one exotic interval to an otherwise fairly conventional one can be quite striking, as in the [1.082a/bitter_sweet.ts bitter sweet ]fractal tune. That one consists of a normal major chord, with an 11/8 added to it to make the scale <font color="#0080FF">'''5/4 11/8 3/2 2 '''</font>. Sounds rather more exotic than you'd expect from adding just one note to a major chord :-).
+
If you want to be a bit more unorthodox, take some normal type of pentatonic scale like the woodstock windchimes {{hiu|5/4 4/3 3/2 5/3 2/1 }}, then change one of the intervals to an exotic one like 11/8, 11/9, 13/8, or some other one using the eleventh or thirteenth or higher prime harmonics. Maybe in this case leave the 3/2 as a kind of grounding thing, so how about {{hiu|5/4 11/9 3/2 13/8 2/1 }}or something. Just to get an idea of what those types of intervals sound like in a scale - and if you like it, as usual, save the result for future reference. Sometimes adding just one exotic interval to an otherwise fairly conventional one can be quite striking, as in the {{fractaltune|1.082a/bitter_sweet}} fractal tune. That one consists of a normal major chord, with an 11/8 added to it to make the scale {{hiu|5/4 11/8 3/2 2 }}. Sounds rather more exotic than you'd expect from adding just one note to a major chord :-).
-
Another fun thing you can do is to make a scale that is non ascending, or an arpeggio that is non ascending. For instance the piece [1.082a/major_chords_round_the_cycle_of_fifths_-_Bach_temperament.ts major chords round the cycle of fifths - Bach temperament] uses a conventional well tempered twelve tone scale from Bach's time - and then an arpeggio 0 4 7 12 7 which goes up a major chord, and then down to the fifth. As you go up this arpeggio, rather than ending at the octave at each repeat of it, you end a fifth higher instead. So the further you go up it, the further you go round the circle of fifths - hence the title. So the tune gradually wanders up the circle of fifths - but because of the fractal nature of the tune, keeps returning to the home key, at longer and longer intervals of time.
+
Another fun thing you can do is to make a scale that is non ascending, or an arpeggio that is non ascending. For instance the piece {{fractaltune|1.082a/major_chords_round_the_cycle_of_fifths_-_Bach_temperament}} uses a conventional well tempered twelve tone scale from Bach's time - and then an arpeggio 0 4 7 12 7 which goes up a major chord, and then down to the fifth. As you go up this arpeggio, rather than ending at the octave at each repeat of it, you end a fifth higher instead. So the further you go up it, the further you go round the circle of fifths - hence the title. So the tune gradually wanders up the circle of fifths - but because of the fractal nature of the tune, keeps returning to the home key, at longer and longer intervals of time.
Now that you have an eye for what to look out for, take a look at the scales and arpeggios used for some of the other fractal tunes and they may give you a few ideas.
Now that you have an eye for what to look out for, take a look at the scales and arpeggios used for some of the other fractal tunes and they may give you a few ideas.
-
Then, try out the SCALA scales - you need to install the SCALA archive first - see [FTS_and_SCALA.htm <font color="#400040">Setting FTS up for SCALA and vice versa</font>] <font color="#400040">. You can order the SCALA scales drop list so that the smaller scales go first in the list, and in fact that's the standard setting for FTS. That's because then the earlier ones in the list will generally be easier to use in the fractal tunes. </font>
+
Then, try out the SCALA scales - you need to install the SCALA archive first - see [[How to set up FTS to work together with SCALA]]].
 +
 
 +
You can order the SCALA scales drop list so that the smaller scales go first in the list. That's the standard setting for FTS because scales with few notes are often easier to use in fractal tunes.
 +
 
 +
SCALA is an entire program completely devoted to the construction and exploration of new scales.
-
<font color="#400040">FTS also has a number of options to help you make your own scales. Take a look at </font>[#New_scales <font color="#0000FF"><u>Make new Scale</u></font>] <font color="#400040">, and the </font>[More_scales.htm <font color="#000000">Scales</font>] <font color="#400040">help page to find out more about this. Of course, SCALA is an entire program completely devoted to the construction and exploration of new scales. </font>
+
FTS has a number of options to help you make your own scales. Take a look at [[Reference#Scales]] and {{w17}} to find out more about this.

Latest revision as of 12:23, 14 May 2015

Up to Task help - Up to Tutorials

WORK IN PROGRESS

Contents

Intro

Who is this for

This is particularly meant as a gentle introduction for those who are completely new to fractal music and algo comp. It also introduces you to the fractal tune making capabilities of Tune Smithy, so you learn about Tune Smithy, and fractal music at the same time.

There is no need at all to have any musical training to compose in this way. So I assume that you are a complete newbie to composing as well. If already an old hand at composing, but new to fractal music, you may find some of it of interest still, as algo comp requires new ideas and approaches - but you may want to skip some of the sections (e.g. on instrumentation).

Those already familiar with algo comp may want to skip forward to #How to save your work. Or if you want to find out in detail how the tunes are constructed in FTS right away, see Seeds_and_fractals.

Before you start

If this is your first time, start up the Player task for FTS. Your desktop shortcut may bring up this task. Or look for it in the Tasks for Tune Smithy folder on your desktop.

Then make sure you are set to the screen that looks like this (if necessary use the More or Less buttons to get to it):

Screen shot player.jpg

The whole tune is based on a small amount of musical material

Fractal tunes belong to a genre known as Algorithmic Composition (or algo-comp). There's a connection with fractal art too, and you could perhaps think of it as a form of musical minimalism - as you get a lot of compositional material from a very small amount of input.

So for instance all the notes in this tune:

tune_as_score.png

are constructed from the four note phrase that begins it. The four note "seed" is the only material used to make the entire tune - which starts as:

0 1 2 0 1 2 3 1 2 3 4 2 0 1 2 0

midi clip

Longer clips: 32 secs midi clip played on recorder

You can probably see or hear how the same basic pattern is used over and over again in each bar (the step sizes change a little but the pattern of steps up and down remains the same). It's less immediately obvious, but the way the seed phrases are put together - the way the tune goes up and down from one bar to the next - also follows the same pattern. The same pattern is then used again and again at larger and larger time scales to build up the entire tune.

The method used to construct the tune is simple (conceptually anyway), yet the tune still has the capacity to surprise, as it repeats at larger and larger time scales at different pitches.

For more about how the tunes are constructed, see Sloth Canonsand Seeds and Fractals.

Comparison with fractal landscapes

Perhaps some of you have enjoyed making fractal landscapes, using programs such as Terragen. An entire landscape can be constructed from a randomly generated fractal texture, by varying some user set parameters.

For many examples, see Terragen Images Gallery

There are many types of fractal music. For some sites to visit to get an idea of the range of work that is done in this field, see the Thinks.com Fractal Music page.

Comparision with L-system like fractal trees

Here is a fractal flower made with my Virtual Flower program:

Virtual_Flower_Screen_Shot.png

It's made from one leaf shape, one petal shape, one branch, and a few angles and dimensions which specify how to join them together. You select the petals, flowers, leaves and branches or make your own - and click and drag on the picture to change the shape of the entire plant all in one go.

For another program which makes images in a similar fashion, see Laurens Lapré's L-parser

Similarly with Tune Smithy, you make or select a musical seed or a few seeds. Then you adjust parameters which specify how the seeds build up to make a tune.

If you change the seed and other parameters, the entire tune changes

Change the seed phrase, or change how the tune is built, or how instruments are selected to play the notes, and the whole tune changes. That's because of the way the seed phrase is used for the construction of the tune at larger and larger time scales. You can hear this quite easily with a few of the simpler tunes such as some of the ones in 1.082a and 1.082b drop lists.

Try for instance 1.082b/ascending_above_the_clouds (mp3). You can probably hear the same seed phrase played over and over again at different speeds to construct the tune. In other tunes it is much harder to hear. T

In fact, most of the tunes, because of the fractal construction used, take the form of augmentation, or sloth canons, with exactly the same tune played simultaneously at many different tempi. You can easily hear this too in the 1.082b/ascending_above_the_clouds (mp3) tune, and some of the other earlier ones.

To hear the sloth canon, mute all except the first part. Listen to the tune. Then mute all except the second part and play the tune a bit faster and you should hear exactly the same tune as before (possibly at a different pitch). You can repeat this for each part - ascending above the clouds is a strict sloth canon.

However don't expect to hear the canon in the more complex tunes. The instrumentation and other parameters (especially the chord progressions) may disguise it so that it is hard to hear, or impossible to pick out at all. It is the basis for the construction nevertheless.

The tunes are also related to an intricate visual pattern called the Koch snowflake fractal. In fact, the icon for Tune Smithy (which you can see as the icon for this wiki too) is a Koch snowflake. If you want to explore these connections, see:

Seeds_and_fractals

Since the tunes are based on such a small amount of actual musical material, then if you change anything, the whole tune changes. Just change one note of the seed and you'll notice the whole tune change. This is very like the fractal landsapes and l-system plants. In fact l-systems derive originally from the Koch snowflake too.

No musical training is needed

You can make fractal art and fractal landscapes with no previous training as an artist - and the same is true of fractal music. You need no training at all as a musician to make fractal music. Perhaps it may inspire you to learn to compose more conventionally later on. Or if you already are a composer, you may use the fractal tunes in your compositions or use them to make new pieces just as they are.

This section will assume nothing in the way of previous experience of music making or composing. I will try to keep it interesting for the more seasoned musicians and composers too. Algo-comp is new to nearly everyone including many seasoned composers. However, if you are a seasoned composer you will probably want to skip some of the sections.

Fractal Composing compared with loop based compositions

Usually if one improvises or composes a piece of music, you choose which notes to play individually. Another way of working, used by many composers nowadays, is to work with repeating loops. The way the loops interact may lead to many surprises, but still, every note of each loop is set individually by the composer. For instance you can easily change a single note for a few repeats of the loop, then go back to the original loop. Or you can change one loop without varying any of the other parts of the tune.

In algo-comp and fractal music, the notes are more interrelated than they are with loops based compositions, so you can no longer adjust individual notes and expect the rest of the composition to remain unchanged. This is perhaps the main thing you need to get used to with fractal music, and it requires a new way of working. A lot of experimentation is often needed, and serendipity, and maybe intuition too, which you develop as you work with the tunes.

You can change individual notes in the seed phrase easily enough, the only thing is, then the whole tune changes.

The only way to change an individual note in the tune is to generate the complete fractal tune first. Once the fractal tune is made, you can edit it, as you might any other midi piece, in your composition software or sequencer. (If you want to follow that up, there are some issues there to do with the way the notes need to switch channels for pitch polyphony, but that's the basic idea).

How to save your work

It is especially important to save fractal tunes, and to use the correct format to save them. So before we start the tutorial, you should know how to save your work. Then, if you make something you particularly like in the tutorial, you will know how to save it.

If you make a fractal tune you particularly like, even if you remember how it went, or have an audio recording of it, be sure to save it as a fractal tune as well. It can be very hard indeed to reconstruct it unless you know the parameters that were used to make the tune. I know of no automatic way to recover the parameters used to make the tune from a recording of the result, and for the more complex tunes, e.g. ones using formulae, it may well be for all practical purposes impossible.

Save as Tune Smithy Fractal Tunes

To save your work, use File (Ctrl + A). Be sure to save your work as Tune Smithy Fractal tunes (*.ts). You can save over the old version again at any time using Crl + S.

Of course you can save as a midi file or mp3 as well. But ALWAYS SAVE IT AS A FRACTAL TUNE (OR PROJECT) AS WELL if you want to be able to go back to it and work on it some more later on.

Or save as a Project

Alternatively you may want to save your tune as a project. This saves nearly all the settings including the skin, colours, and so on. That can be useful sometimes, e.g. perhaps to have a different skin for each tune, if working on different tunes simultaneoulsy. You can configure what gets saved to the project from Project Options (Ctrl + 195)

First exercise, vary the seed

In our first exercise, we discover how the tune varies as you change the seed. Start up the fractal tune player - from your desktop shortcut - or look for Player in your Tasks for Tune Smithy folder.

Select any tune from the drop list of fractal tunes (circled in red below).

Screen shot player vary seed.jpg

Now select a seed for one of the other tunes, from the drop list of seeds (circled in blue). Notice how this changes the entire tune for all the instruments.

Now try adjusting individual numbers for the seed. Keep the first number as it is (usually 0) and change one of the other numbers. You can do this while the tune is still playing.

Or - do this using Seed as bar charts (Ctrl + 76), click on any of the tune notes in the seed numbers area of this window, and drag up and down:

Fractal tune seed chart.png

Once more, hear how the entire tune changes even when you change a single note of the seed.

Using your fractal tunes in conventional compositions

As you will realise, this needs a new way of working. But you can use the material from the fractal tunes more conventionally if you like.

See How to use fractal tunes in conventional compositions

Making fractal tunes

Here though, we'll focus just on the process of making the fractal tunes themselves.

Fractal music work needs a much more experimentalist approach than other types of music making. Don't be afraid to just try out anything. After all it is easy to change things. If you do something that sounds particularly nice, save it for future reference and continue exploring. If you want to go back to a previous stage of the tune you are working on you can undo your changes using Ctrl + Shift + Z (repeatedly if necessary) and redo them using Ctrl + Shift + Y.

If curious about how the tunes are constructed, look at Seeds and fractals for an introduction.

Making seeds for the tunes

You can change the seed for the tune using the main window seeds drop list, or Seed as bar charts (Ctrl + 76) or Main window seed (Ctrl + 77)

You can also make new seeds with the Mouse & PC keyboard Player using New Seed (Ctrl + 3) - see [Seeds.htm#Making_new_seeds_for_the_melody Make new seed], also from a music keyboard if you have those - see [Seeds.htm#Making_new_seeds_from_midi_keyboard Make new seed from Music Keyboard].

Second Exercise - Vary the Intrumentation

The fractal tune is made up of different parts, and you can change the instrument for each part separately.

To change the instrument for a part, highlight the part you want to change in the Parts window Ctrl + 9. You can then change the instrument using the Instruments Menu... (Ctrl + 8) - this changes the instrument for the highlighted part. You can also use Percussion... (Ctrl + 21) for any part, and the Wave Shape Player Instruments (Ctrl + 196).

Or type the instrument name into the text field at the bottom of the list of instruments in the Parts window - recognises fragmentary names and you'll see the instrument change as you type.

N.B. the instruments menu will show check marks for all the instruments used in any of the parts. But if you click on the menu you set the instrument for just the part highlighted in the Parts window. Sorry this is a bit confusing when you want to change an instrument you can hear in the tune and don't know what part it is. Start with the Parts window and everything should be clearer. Will do something about it in FTS 3.2. when ready.

Instruments

Seasoned composers and musicians can skip the next couple of sections. It is meant as a gentle start for complete newbies to instrumentation. You don't have to be a trained musician to use Fractal Tune Smithy to make fractal tunes - any more than you need to be a trained artist to make fractal art.

If you are a newbie to orchestration - this next section is for you.

Now lets explore instrumentation of the fractal tunes.

Solo music

Let's start with solo music. Choose one of the example fractal tunes with a solo instrument, or mute all except the first part in the tune, or choose File >> New. Choose a seed from the drop list or make a new one - any seed is fine for this exercise.

Try selecting other instruments from the Instruments (Ctrl + 8) menu, and hear what the same tune sounds like on various instruments. Try continuously flowing instruments like flute or string, and plucked instruments like harp, and percussive instruments like marimba. Notice how the tune changes. Do you prefer some tunes on the plucked instruments and others on the more continuously flowing type instruments?

Try the instruments at different octaves. You can shift them up or down in pitch in the Octave shift column in Parts (Ctrl + 9)

Several instruments in unison

Try the instruments in the Custom drop menu in Instruments (Ctrl + 8). For instance Flute + Oboe, Bassoon + violin etc. Some of the combinations in this drop list are orthodox, some rather unusual. Most of them consist of several instruments that play the same tune, in unison, or at octaves. Some use other intervals or are more complex.

This is a common composition technique. Many folk musicians play the same tune in unison, apart maybe from the harp or piano which plays chords. In the orchestra, composers often double up instruments for effect, e.g. flute + oboe etc. The instruments blend together to some extent to make a new sound for the tune.

To make your own custom instruments like these, go to Custom Multi Instrument Voices Menu (Ctrl + 37) and select one of the example custom multi instrument voices. Then use Copy Voice. Go down and give your new custom voice a name in the Name for custom voice field. Then highlight one of the instruments and use Edit Instr. This brings up Highlighted Instrument for Custom Multi Instrument Voice (Ctrl + 44). You can then select another instrument using Instruments (Ctrl + 8). When you work with Highlighted Instrument for Custom Multi Instrument Voice (Ctrl + 44) or Custom Multi Instrument Voices Menu (Ctrl + 37) your instrument selections in Instruments (Ctrl + 8) change the instrument for the highlighted instrument in Custom Multi Instrument Voices Menu (Ctrl + 37). If you want one of the instruments to be transposed, or vary its volume compared with the other instruments in your voice etc you can do this with Highlighted Instrument for Custom Multi Instrument Voice (Ctrl + 44).

Repeat for all the instruments for your new voice. Add or delete instruments if necessary in Custom Multi Instrument Voices Menu (Ctrl + 37). You should find your new custom voice gets added to the Custo drop menu in Instruments (Ctrl + 8) and you can then use it in your fractal tunes.

Multi-part music

Now, try music with more than one part in play. You can just change to another tune with many parts and use that as a starting point.

Or if you want to make a multi-part tune from one of your solo tunes, go to Parts (Ctrl + 9), and increase the number of parts the fractal tune plays - or unmute the other parts.

You may also need to change the selection in the Order of Play menu for Parts (Ctrl + 9) - try Layer with simultaneous notes - or for more complex effects, try Other... in the same menu. Another way to get interesting multi-part music is to use Rhythms and Polyrhythms (Ctrl + 89) from Tune options, drone, && Undo / Backups (Ctrl + 33).

For chords, try Chord Progressions for Arpeggios (Ctrl + 151) - you need to have a tune with many parts playing simultaneously already - then use this to adjust the chords that the parts play.

You can use the fractal tunes as your sandbox to experiment with orchestration

The fractal tunes provide an ideal environment for a beginner composer to experiment with orchestration - you don't need to think much about the notes - just focus on the sounds of the different instruments, and how they mix with each other. You may also find you appreciate listening to orchestral music more as a result of experimenting with orchestration yourself in this way.

A brief introduction to musical instruments and instrumentation for newbies

As a newbie to composing, you may wonder how best to mix instruments together in your pieces. If you are at a bit of a loss here, it may help to think about which families the instruments belong to.

Then you can think about what the effect will be to mix together instruments of the same family, or different families. Of course if you are happy with your instrument selections for your fractal tunes, feel free to skip this section :-).

Some of the main types of instrument include:

Each of these has further subdivisions, for instance, the wind instruments are subdivided into

The Cor Anglais, or English Horn as it is otherwise known, despite the name, is actually a type of oboe so counts as a woodwind instrument.

The Instruments (Ctrl + 8) menu is grouped using the families of the General Midi specification. This is a standard arrangement assumed by nearly all the midi clips you find on the internet use - but it has its eccentricities. E.g. the ethnic classification (why is the koto instrument is counted as ethnic rather than strings - when the Shakhuachi, which is often played along with koto - is counted as a wind instrument rather than ethnic?).

For more about instrument families, see the wikipedia article Musical Instrument

Sometimes composers make ensemble pieces in which only one type of instrument is used, such as a consort of recorders, viols, trombones or whatever.

Or you can combine instruments of the same family together in an Instrumental ensemble]. The string quartet consists entirely of string instruments - the violin (two of them - the first and second violin), viola, and 'cello.

Other ensembles may consist entirely of woodwinds - or brass instruments (think of a brass band), or a combination of both. There the instruments blend nicely together - yet there is something pleasing about the individuality within the blend, for instance the distinctive sound of a viola in a quartet, or a tuba in a brass band.

In other pieces, instruments are used that contrast / complement each other nicely. Some instruments are very companionable as it were, for instance, flute and harp go nicely together.

Generally, it can be nice to combine a plucked or percussive instrument like harp, marimba etc with a melodic instrumnt with a more legato smoothly flowing type of sound such a flute, violin etc. Also it's nice to combine strings with wind instruments - and of course the orchestra has instruments from all the families, often played in episodes in which some of the players take a rest while others play in some contrasting arrangement, or as a little consort of woodwinds suddenly in the midst of it all, or whatever.

Instrument ranges

Each instrument has a natural range. Within its natural range it is at its most "comfortable" and natural sounding. But when you play exceedingly high or low notes you may get interesting effects. For instance, the double bass is a low pitched instrument. You can play it high, but this is rarely done - it has an interesting rather "thin" kind of a sound when it is played like that. You even get double bass concertos in which the double bass is the solo instrument, mostly played high.

For an example of an instrument played below its natural range - the flute is usually played high, with middle C as the lowest note - but you can get alto flutes and even bass flutes that go very low. Similarly for other instruments. For instance, the clarinet is usually a high pitched instrument - like the flute though it goes a bit lower. But there are bass clarinets as well, and Stravinsky uses a bass clarinet to great effect in his The Rite of Spring.

Some instruments change completely in timbre depending on the register - the Basson has a very distinctive timbre in its lower register. When played high however, it sounds almost like a new instrument (this is used to great effect by Stravinsky in the opening of The Rite of Spring).

So that's something to bear in mind. You can either play the instruments close to their natural range - or for effect you can play them higher or lower.

To move individual parts up or down by octaves, go to the Parts window, and highlight the part,and change the Octave Shift (either use the up / down button or type new value in the box below the list).

To find out more about an individual instrument, it's range and other details see the Wikipedia List of musical instruments

Orchestration

So now for our next exercise - to experiment with orchestration. Choose any of the fractal tunes from the drop list, or one of your own tunes from your earlier experiments. Show the Parts window. This window shows all the instruments used in the tune - the only ones used are the ones up to the number of parts in play.

Vary the instruments in the Parts window

Select one of the parts, and then change the instrument for the part. To do that, select a new one from the Instruments menu - or type the instrument name into the text box below the Instr. list in the parts window.

Also see what happens when you vary the octave shift. For instance you can try out the Bassoon and see what happens when you play high and low notes.

You can do this while the tune is playing, and hear how it changes as you vary the instruments. If you can't quite pick out one of the parts when all the instruments are playing simultaneously, use the Mute button to mute some of the parts. Once you can hear them, put the others back as they were and see if you can still hear it in the complete piece. Or - try playing the whole tune with all the parts in place, then mute just that one part you find hard to hear, and see what effect that has on the whole tune.

Solo instruments

Sometimes one of the instuments in a composition is a "solo" instrument that carries the tune - think of a singer accompanied by harp, lute, guitar or piano for instance. Often the accompanying instruments have their own solo sections when they carry the melody for a while.

With the fractal tunes, generally the fastest tune is the more prominent solo one - but sometimes one of the middle speed ones is. Generally, the one that is at the right speed for the tune to be "singable" is the solo instrument - singable that is in terms of speed at least. Sometimes the tune stays with one instrument, or with fractal tunes, the main tune gets moved around amongst various instruments.

So, think about which instrument one wants to use for the solo line. Often it tends to be a higher pitched instrument. When you have lots of instruments playing at once, it is somewhat easier to make one of the higher instruments the solo line. If you make a low instrument your solo, you need to take care to make sure it can be heard easily. For instance make the higher instruments quieter, or constrasting in character and not so prominent (e.g. plucked or piano etc).

Solo lines that pass from one part to another

In other tunes, the solo line is passed from one part to another. To get this sort of effect, the best approach is usually to work with Choose parts by |Other in Parts (Ctrl + 9). Try some of the example fractal tunes that work like this, usually you will see that that option is selected. Then try varying the formula for them and hear how the tune changes.

Accompanying instruments

Often the accompanying instruments are lower in pitch - though you often also have many notes which are higher in pitch than the main melodic line - e.g. maybe a piano or guitar will play high notes above the range of the singer they accompany.

You may want to play some of the accompanying instruments more quietly - you can do this using the Volumes for the individual parts in Parts (Ctrl + 9).

Which instruments to use for the solo and which for the accompaniment

If you have a combination of a plucked or percussive instrument with a more continuous string / wind / voice instrument, the more continuous one has a tendency to carry the main melodic line more frequently - one could hardly call that a rule as if so, it is frequently broken, but something to think about.

So, experiment with various instruments for the main melodic line and try conventional type arrangements where the main melody is continous and high-ish, and also more unconventional ones where it is percussive or plucked or low.

Try various instruments for the accompaniment, and just get a feel of which ones help and which ones obscure the main line, when combined with the other instruments.

The main thing here is just to have fun and try out lots of things. Some of your instrument combinations may sound terrible to you, but if so that's interesting too. Sometimes instruments that clash badly in one tune, just don't fit the atmosphere of the tune, may be just what you need for another tune with a different feel to it.

Pieces with no strong melodic focus

Some pieces too may have more of a chordal than a melodic focus, and may have no strong melodic line at all. See if you can make an ensemble type piece where all the parts are played by the same instrument. The easiest way to get started may be to go through the example tunes and find one that is like that already. Either just use it as it is or vary the parameters to make your own tune.

Then when you have settled on a tune to experiment with, try it out with various choices of instrument for the ensemble. You can change the voice for several parts in one go by highlighting them all at once. Click on the first part in Parts (Ctrl + 9) then Shift + click on the last - then select a new voice as usual, e.g. using Instruments (Ctrl + 8). You will find it gets selected for all the highlighted parts in one go.

Some of the instrumentations chosen for the fractal tunes that come with Fractal Tune Smithy are fairly conventional and some are already unconventional. Have a listen to some of them and see which ones you think sound more conventional and which sound rather unconventional in the instrumentation. Then change the instruments and try your own experiments with them and with your own new tunes - either way - conventional sounding or unconventional.

Have fun :-).

A quick way to build up a fractal tune one voice at a time

Start with File | New . Choose which instrument you want for the first part from the Instr. menu. Now make sure you have Instr. | Auto Sel Last selected. Increase the Number of Parts to play one at a time, and each time select a voice from the Instr. menu until you have the number of parts in play as desired - you can do all this while the tune is playing. Then transpose the parts as desired by showing the Parts (Ctrl + 9) window and using the Octave Shift column as usual. If you want to transpose the entire tune up or down - all the parts at once - use the Pitch of 1/1 of Scale (Ctrl + 10) window.

Moving the tune from one instrument to another, and hocketing

Show the Parts window. Then look at the Order of Play menu, and see what you have selected there. If this is a new tune, then you'll find it shows By Layer. You can hear this in the 1.082b/oboe_and_friends (mp3) fractal tune. The tune continues normally in the top line, but the start of every seed that begins a new seed at a higher layer gets played by one of the other instruments instead of the oboe. You get this kind of syncopated effect with the oboe often missing the first note of its seeds. So, try that out to hear what it sounds like with your instrumentation.

Many of the fractal tunes use the next selection in this list, By layer with simultaneous notes Try that instead - you will find the first part plays all its notes, accompanied by the second part playing the same tune,but more slowly - now the extra notes played by the other parts get sustained all the way to the next note for that part. And so on - you'll hear a canon by augmentation in fact with your chosen instruments, as explained in Seeds and fractals and Endless Canons.

Okay, that's pretty nice, many of the tunes use it. However, let's explore the other options here.

By Note height - the same note in the arpeggio always gets played by the same instrument. By time- the tune just cycles round amongst the instruments, each playing one of the notes in turn. Cummulative note height is a more complex way of assigning notes to the instruments. Anyway the general idea is that the tune gets broken up by being assigned to each instrument in turn. This is known as hocketting. See the help for this window for a little about those options: [User_guide2.htm#Order_of_play_menu Order of play menu].

Try those various options - then try the Other option. This lets you make up your own combinations of the other options. Actually, you don't need to try to keep track of what the formula will do. Just enter some formula using the various letters such as t+m+h or N+H+L or whatever, and see what happens. You can try it out with any of the pieces. There are various other options in this window to explore - see it's help [User_guide2.htm#Order_of_Play_Other Order of play | Other]. The option to Sustain all notes to next note for same part can be used to get several parts playing together.

Also at this point one could also digress to explore Bs | Seeds Options | Seed pos increment as well, perhaps with By layer with simultaneous notes - see the help for that window for some informatin about what it does - main effect is you get more notes played in the second and third parts, and a somewhat more complex texture to the fractal tune. One could also try the polyrhythm tunes too - many other things too, but I'll leave those for later FAQ entries on this page. Now, let's go on to the tuning of the notes - the really fun part in my (slightly biased probably) opinion.

Tuning

For this exercise, choose any of the fractal tunes, or one you built up from new in the previous exercises, and try changing the scale from the scales drop list.

As a general guide, ones with fewer notes in them are easier to use, and five or seven or there abouts is enough to have an interesting variety of intervals for the melody, and few enough notes so that nearly everything you play will be nice. Try twelve tone scales with the pentatonic or diatonic modes (in the Arpeggios drop list) - and the minor scales. Then have a look at the other modes for the twelve tone scale (by a mode here I mean a selection of notes from the scale), e.g. the 5 note modes, which you get to from the Arpeggios drop list for the twelve tone scales..

If you find the tune goes rather high or low, you can set a range for each part using Note Ranges window. To set the range for several parts at once, highlight all the ones you want to change. The scroll bars shift the bounds of the range by semitones, tones, or the scroll bar below the note number shifts it up / down by octaves.

If you would like an introduction to the various twelve tone systems in the Scales drop list at this point, have a look through How do I play the historical tunings of the diatonic and twelve tone systems? which will get you started. Also have a look through the Musical note intervals page for some of the background and theory for them. But, you don't need to know all that to have fun with them - it is just for those who find such things of interest, and kind of useful eventually to know in the long run I expect.

You'll see there are many other scales apart from thtwelve tone ones. Try the Pygmie and Koto scales, which are very tuneful, also the Slendro and Pelog which are really interesting and unusual (to the Western ear - these are scales typical of those used in Indonesia). Try the Thailand scale too, which is close to seven equal temperament (seven equally spaced notes to an octave). Generally, try the ones with fewer notes first.

Also be sure to have a go with the harmonic series. This is the series of notes you get in the partials (component frequencies of the note) of many "harmonic" timbres such as voice or string, woodwinds - most of the instruments of the orchestra in fact. The result is that the notes of the harmonic series go well together. See [harmonic_series_notes_sound_well_together.htm Why two notes of the harmonic series sound well together ]

For a really unorthodox one try the Bohlen-Pierce one - that one should have 3/1 (octave plus a fifth) instead of 2/1 (octave) as the "octave". So in the Parts window, change the drop list to read Modulate by (interval) and to transpose instruments up / down, use 3 or 1/3 or 9 or 1/9 if you want them to go up and down by two "octaves".

For some more small scales to try go to Scales | More Scales drop lists - then the Woodstock windchimes scale there is really nice, and also the selection of pentatonic scales labelled " Canright's exs from Superparticular Pentatonics ", and " Canright's Some pentatonics I have known ".

If you want to be a bit more unorthodox, take some normal type of pentatonic scale like the woodstock windchimes 5/4 4/3 3/2 5/3 2/1 , then change one of the intervals to an exotic one like 11/8, 11/9, 13/8, or some other one using the eleventh or thirteenth or higher prime harmonics. Maybe in this case leave the 3/2 as a kind of grounding thing, so how about 5/4 11/9 3/2 13/8 2/1 or something. Just to get an idea of what those types of intervals sound like in a scale - and if you like it, as usual, save the result for future reference. Sometimes adding just one exotic interval to an otherwise fairly conventional one can be quite striking, as in the 1.082a/bitter_sweet (mp3) fractal tune. That one consists of a normal major chord, with an 11/8 added to it to make the scale 5/4 11/8 3/2 2 . Sounds rather more exotic than you'd expect from adding just one note to a major chord :-).

Another fun thing you can do is to make a scale that is non ascending, or an arpeggio that is non ascending. For instance the piece 1.082a/major_chords_round_the_cycle_of_fifths_-_Bach_temperament (mp3) uses a conventional well tempered twelve tone scale from Bach's time - and then an arpeggio 0 4 7 12 7 which goes up a major chord, and then down to the fifth. As you go up this arpeggio, rather than ending at the octave at each repeat of it, you end a fifth higher instead. So the further you go up it, the further you go round the circle of fifths - hence the title. So the tune gradually wanders up the circle of fifths - but because of the fractal nature of the tune, keeps returning to the home key, at longer and longer intervals of time.

Now that you have an eye for what to look out for, take a look at the scales and arpeggios used for some of the other fractal tunes and they may give you a few ideas.

Then, try out the SCALA scales - you need to install the SCALA archive first - see How to set up FTS to work together with SCALA].

You can order the SCALA scales drop list so that the smaller scales go first in the list. That's the standard setting for FTS because scales with few notes are often easier to use in fractal tunes.

SCALA is an entire program completely devoted to the construction and exploration of new scales.

FTS has a number of options to help you make your own scales. Take a look at Reference#Scales and Scale and Explorations (Ctrl + 17) to find out more about this.

Personal tools
Namespaces
Variants
Actions
Navigation
How to use the wiki
More
Toolbox