Help for Tune Smithy
From Tune Smithy
Part to play
If this shows Highl. Part it plays whichever part is highlighted in Parts window...
Or the first part highlighted if it is a multiple selection.
To set this to the highlighted part, enter 0 for the part number or adjust the number downwards below 1 using the up / down control
Set which instruments play in the Tune Smithy parts, and the volumes for parts etc...
You can set up any part with an instrument, volume, controllers and other parameters here. You can also set a different tuning for each part too using the Scales for Parts window.
This part then can be used in many places in Tune Smithy using the part number, and is the equivalent of a Midi Out channel in FTS. You can't use Midi channels directly as the notes for a single part often have to be relayed to many different channels for retuning purposes.
What to play
Whether to play a chord, broken chord or sequence of notes
Asc. / desc.
Play the broken chord or sequence ascending, descending, both, or endlessly
Play Seed Only >>
Configure how the seed is played when you click the Play Seed button...
This window configures what you hear when you click the Play Seed button. These settings make no difference to the fractal tune or metronome.
Easy way to make a new scale by selecting notes from other scales...
Shows this window with either less space, less options, or alternative layout
Figuration to play for the sequence or broken chord...
If you want a figuration that starts at the beginning, and repeats shifted up one step at a time then enter any sequence of numbers that begins with 0 and ends with 1.
0 1 3 1
would repeat as
0 1 3, 1+0 1+1 1+3, 2+0 2+1 2+3 ...
0 1 3, 1 2 4, 2 3 5 ...
Keeps going until it gets to the last note of the sequence (or above it)
Pattern is inverted for the descending sequence or broken chord
If the figuration ends with 0 or less, it is played in its entirety once only
Play last note for an extra
Number of notes to play at normal speed...
If there are more notes than this in the broken chord or sequence, they are played faster, otherwise slower, to take the same total time.
When selected, broken chord or sequence times are taken from the total time...
So e.g. if the broken chord is played for a total of one beat, and each note is 0.1 beats, a five note broken chord would take half a beat, leaving half a beat to sustain it.
A ten note broken chord would then take up the entire beat, with no sustain and a broken chord of even more notes would extend the total time for the broken chord (unless the option is selected to play each chord for the same total time whatever the number of notes)
(Similarly for sequence)
The total time needed to play the broken chord or sequence can vary if this option is unselected, and the option to play in the time for a particular number of notes is also unselected.
Grace notes - SPIN
Adjust the number of notes to play at normal speed...
Play in time for
Varies speed of broken chord or sequence so they always take the same time....
So if the broken chord or sequence has more than normal then the notes are played faster, if less then slower, adjusted so that the complete sequence is always played in the same time.
Help = F1
Click for help for this window. Or F1. Other opts: Shift , Alt, Ctrl + click...
F1 or click shows the help for the current window in your web browser.
Some windows may have no help yet in which case the help icon is shown crossed out with a red line.
You can tell if a tool tip has extra help if it ends ... like this one.
Ctrl + F1 or Ctrl + click takes you to the list of keyboard shortcuts for Tune Smithy.
Reset, or Save settings for this window. RIGHT CLICK for all windows menu...
Shows the Organise windows window - which you can use to reset all the parameters for the current window.
You can also use it to save the settings for just this window, or open previously saved parameters for just this window.
Also has a drop list of all the windows and their shortcuts, and related options - some to do with the menu listing, and some to do with window resizing and minimising.
Scales Dialog Star
Tip of the day - Scales category - right click for neighbouring windows...
Left click for a tip of the day in this category.
Right click to see a menu of neighbouring windows.
N.B. This list of neighbours may change when these pages are updated.