Help for Tune Smithy Koch snowflake icon.gif

Window 46

From Tune Smithy

Revision as of 14:22, 10 July 2008 by Robertwalker (Talk | contribs)
Jump to: navigation, search


Previous - Up - Next

Contents

Edit Custom Multi Instrument voice as timbre

Intro

Lets you set up instruments at many intervals from the 1/1 in one go

Ratios options...

Options for display of ratios - factorise, lattice notation, etc.

Volumes as

How to show volumes - choose which range is most useful...

The 0 to 127 is useful if you want to compare it with midi data as midi velocities use this range.

Name for this custom voice

Rename custom voice - you can use Copy Voice to make a new one first...

To make a new custom voice, select any of the preset voices, and copy it using Copy Voice. Then edit it - e.g. add instruments, edit individual instruments etc - and rename it here to the desired name.

This name is used to select the instrument in the Parts window. So avoid using the same name as ones already in use e.g. in the Voices menu, Waveform player menu or the Non melodic percussion menu.

If you do enter the same name as one already in use, you get a tool tip warning - and you will need to edit it, e.g. add (2) after the name or whatever, to make it distinctive.

>> History

Click here to show recently visited files of this type...

Alternatively, Ctrl + right click on button, text field or drop list

Keyboard shortcut Ctrl + F10

Amplitudes

Use the raw amplitudes as volumes...

An increase of about 3 decibels corresponds (almost eactly) to a doubling of amplitude. So if you use amplitudes as the volumes, then the volumes will vary much more than they do if you use decibels.

Humans hear volume levels logarithmically - so assuming that the midi velocities correspond to perceived volumes, then you should use decibels to get the same volumes out as in.

However, synths vary a fair amount in how they interpret dynamic ranges.

If for some reason the midi device is using amplitudes instead of decibels to interpret the midi velocities, then you may want to use amplitudes. For instance if it has an option to select a linear midi velocity to amplitude mapping, and you are using that option then you may want to use amplitudes here as well.

Decibels

Use decibels - corresponding to perceived volume - for the volumes...

This is the more usual situation. A doubling of amplitude corresponds almost exactly to an increase in volume by 3 decibels.

If you use decibels as the volumes, then the volumes will vary much less than they do if you use amplitudes.

Humans hear volume levels logarithmically - so assuming that the midi velocities correspond to perceived volumes, then you should use decibels to get the same volumes out as in.

So this is normally the best choice.

However, synths vary a fair amount in how they interpret dynamic ranges.

If for some reason the midi device is using amplitudes instead of decibels to interpret the midi velocities, then you may want to use amplitudes. For instance if it has an option to select a linear midi velocity to amplitude mapping, and you are using that option then you may want to use amplitudes here instead.

Max midi volume is

Preset is 80. You can set this HIGHER to DECREASE the dynamic range...

This sets how many decibels 127 should be treated as. If a note is at its maximum amplitude, then it will be treated as midi velocity 127. The volume for a quieter note is found by working out how much quieter it is than the loudest possible note, and then subtracting the difference in decibels converted to midi note values.

So - if you set this large, then it means there are many decibels between the loudest and the quietest notes - so volumes have to be very quiet before they count as less than midi velocity 1, so the midi dynamic range is less for the same range in decibels.

If you set it low then notes that are still quite loud will come in below midi velocity 1 so many notes will get cut off as too quiet to sound.

Help = F1

Click for help for this window. Or F1. Other opts: Shift , Alt, Ctrl + click...

F1 or click shows the help for the current window in your web browser.

Some windows may have no help yet in which case the help icon is shown crossed out with a red line.

Shift + F1 or Shift + Click brings up the tool tips extra help window (this window) to show any extra help for a tool tip.

You can tell if a tool tip has extra help if it ends ... like this one.

Ctrl + F1 or Ctrl + click takes you to the list of keyboard shortcuts for Tune Smithy.

Alt + F1 or Alt + click (alternatively Caps lock physically held down + F1 or Click) takes you to the on-line page at the robertinventor.com web site about the current main window task - which gives a short introduction to it for newbies to the program. If there is no on-line page specific to a task, takes you to the main tune smithy page on the web site.

Since the help for Tune Smithy is currently a bit out of date and needs to be redone completely for the new 3.0 release, then you may find the on-line page for some of the newer tasks particularly useful.

Organise Windows = F2

Or F2 - Reset / save / open for individual windows, right click for cat. list...

Shows the Organise windows window - which you can use to reset all the parameters for the current window - or save them all, or open previously saved parameters for just this window. Also has a drop list of all the windows and their shortcuts.

You can also right click on this icon as a quick way to get the floating drop menu of all the Tune Smithy windows organised by category

Other Dialog Star

Tip of the day - For All category - right click for neighbouring windows...

Left click for a tip of the day in this category.

Right click to see a menu of neighbouring windows.

The neighbours are the ones you most often move to after this one or within a minute of this one, arranged by popularity.

So as you continue to use FTS, it will learn your habits, and the neighbouring windows listed here, should be the ones you most often visit after this one.

Neighbours, and Previous - Up - Next

Help For Tool Tip - Shift + F1 (Ctrl + 141)

New Scale (Ctrl + 5)

Look for Moment of Symmetry scale (Ctrl + 128)

Similar Waves For Pitch Detection (Ctrl + 127)

Tip of the Day (Ctrl + 125)

Musical e-card To and Subject (Ctrl + 124)

PC Keyboard Player - To Show, sustain and controller (Ctrl + 123 or Ctrl + K1)

Muscial E-card Picture and Tune (Ctrl + 122)

Make Muscial E-card (Ctrl + 121)

N.B. This list of neighbours may change when these pages are updated - based on the ones I use myself. Prob. will show something else here in future.

Personal tools
Namespaces
Variants
Actions
Navigation
How to use the wiki
More
Toolbox