Help for Tune Smithy Koch snowflake icon.gif

Window 63

From Tune Smithy

(Difference between revisions)
Jump to: navigation, search
m (1 revision)
 
(38 intermediate revisions not shown)
Line 1: Line 1:
 +
<!-- This window is auto-generated from the Tune Smithy tool tips - don't edit it directly - any changes will get discarded next time it is imported into the wiki-->
[[Window 62 | Previous]] - [[All_Tune_Smithy_Windows | Up]] - [[Window 64 | Next]]
[[Window 62 | Previous]] - [[All_Tune_Smithy_Windows | Up]] - [[Window 64 | Next]]
= Oscilloscope =
= Oscilloscope =
-
==[[Window 63 | Intro]]==Shows the music currently played or as it is recorded in an Oscilloscope...==Start rec.==Start the recording - short cut Page up...This starts the temporary recording and the oscilloscope at the same time as the oscilloscope uses the temporary recording to analyse the sound to try and locate the wave.Tip: the Page up shortcut also works from the PC keyboard music player. To stop the recording you use Page down and again you can use that from the PC keyboard music player.This stops the temporary recording and the oscilloscope at the same time.This means you can pause the oscilloscope at a particular note you are currently playing in the pc keyboard player without needing to switch over to the oscilloscope to do it, to view the waveform at your leisure.==Stop==Stop the recording - short cut Page down...This stops the temporary recording and the oscilloscope at the same time.Tip: the Page down shortcut also works from the PC keyboard player. This means you can pause the oscilloscope at a particular note you are currently playing in the pc keyboard player without needing to switch over to the oscilloscope to do it, to view the waveform at your leisure.==Play this==Play the waveform currently showing in the oscilloscope...FTS may not always find the right wave if the waveform is complex - it looks for repeating waves and uses various heuristics to find it. If it finds one too high or low then you will find out when you play it. If it is in the same pitch as the original note then it found the correct wave.You can also play the waveform as pitch glissandi using Shift + click on this button - this is mainly of interest to blind users as it gives a way of hearing the shape of the waveform from the way the pitch goes up and down - it fades as it crosses the zero position so that you know where that is too.==Play Rec==Play recording, Alt, Shift or both + Play to slow down and reduce freq...The Shift + play plays a recording at half speed, so reduces the  freq by an octave, and plays each note for twice as long as normal. Similarly Alt + play reduces the frequency by two octaves, at quarter speed, and the two together reduce it by three octaves, and plays it at eighth speed.This  is particularly useful for the Count Waves task - you can use the same combination of Shift and alt with the Play Seed buttong, and so use it to compare the trnascribed seed with the original at a lower pitch and slower speed. Especially useful for high pitched  quickly changing sounds like bird song.==[[Window 66 | Opts...]]==Configure the oscilloscope, play waveform as pitch glissandi for blind users==[[Window 108 | Rec. Opts...]]==Audio format for recording, display settings, and various options and tools.==Rec. Vol.==Select whether to record from microphone, or midi, or "what you hear" etc...What you see hear depends on your system and soundcard. Usually there is a fader for the microphone and one for your  midi synth, or maybe "What you hear" or "Stereo mix" etc. It controls the standard levels of recording for the whole of your system and windows.==Play Vol.==Adjusts the playback volume for windows as a whole==Help = F1==Click for help for this window. Or F1. Other opts: Shift , Alt, Ctrl + click... F1 or click shows the help for the current window in your web browser. Some windows may have no help yet in which case the help icon is shown crossed out with a red line.Shift + F1 or Shift + Click brings up the tool tips extra help window (this window) to show any extra help for a tool tip. You can tell if a tool tip has extra help if it ends ... like this one.Ctrl + F1 or Ctrl + click takes you to the list of keyboard shortcuts for Tune Smithy.Alt + F1 or Alt + click (alternatively Caps lock physically held down + F1 or Click) takes you to the on-line page at the robertinventor.com web site about the current main window task - which gives a short introduction to it for newbies to the program. If there is no on-line page specific to a  task, takes you to the main tune smithy page on the web site.Since the help for Tune Smithy is currently a bit out of date and needs to be redone completely for the new 3.0 release, then you may find the on-line page for some of the newer tasks particularly useful. ==Organise Windows = F2==Or F2 - Reset / save / open for individual windows, right click for cat. list...Shows the Organise windows window - which you can use to reset all the parameters for the current window - or save them all, or open previously saved parameters for just this window. Also has a drop list of all the windows and their shortcuts.You can also right click on this icon as a quick way to get the floating drop menu of all the Tune Smithy windows organised by category
+
==Screen Shot==
-
=Neighbours, and [[Window 62 | Previous]] - [[All_Tune_Smithy_Windows | Up]] - [[Window 64 | Next]]=
+
[[Image:Window_63.png|Oscilloscope]]
-
[[Window 141 |  Help For Tool Tip - Shift + F1 (Ctrl + 141) ]]
+
-
[[Window 5 |   New Scale (Ctrl +  5) ]]
+
==[[Window 63 | Oscilloscope]]==
-
[[Window 128 |  Look for Moment of Symmetry scale (Ctrl + 128) ]]
+
Shows the music currently played or as it is recorded in an Oscilloscope...
-
[[Window 127 Similar Waves For Pitch Detection (Ctrl + 127) ]]
+
==Start rec.==
 +
 
 +
Start the recording - short cut Page up...
 +
 
 +
This starts the temporary recording and the oscilloscope at the same time as the oscilloscope uses the temporary recording to analyse the sound to try and locate the wave.
 +
 
 +
Tip: the Page up shortcut also works from the PC keyboard music player.
 +
 
 +
To stop the recording you use Page down and again you can use that from the PC keyboard music player.
 +
 
 +
This stops the temporary recording and the oscilloscope at the same time.
 +
 
 +
This means you can pause the oscilloscope at a particular note you are currently playing in the pc keyboard player without needing to switch over to the oscilloscope to do it, to view the waveform at your leisure.
 +
 
 +
==Stop==
 +
 
 +
Stop the recording - short cut Page down...
 +
 
 +
This stops the temporary recording and the oscilloscope at the same time.
 +
 
 +
Tip: the Page down shortcut also works from the PC keyboard player.
 +
 
 +
This means you can pause the oscilloscope at a particular note you are currently playing in the pc keyboard player without needing to switch over to the oscilloscope to do it, to view the waveform at your leisure.
 +
 
 +
==Play this==
 +
 
 +
Play the waveform currently showing in the oscilloscope...
 +
 
 +
FTS may not always find the right wave if the waveform is complex - it looks for repeating waves and uses various heuristics to find it. If it finds one too high or low then you will find out when you play it. If it is in the same pitch as the original note then it found the correct wave.
 +
 
 +
You can also play the waveform as pitch glissandi using Shift + click on this button - this is mainly of interest to blind users as it gives a way of hearing the shape of the waveform from the way the pitch goes up and down - it fades as it crosses the zero position so that you know where that is too.
 +
 
 +
==Play Rec==
 +
 
 +
Play recording, Alt, Shift or both + Play to slow down and reduce freq...
 +
 
 +
The Shift + play plays a recording at half speed, so reduces the  freq by an octave, and plays each note for twice as long as normal. Similarly Alt + play reduces the frequency by two octaves, at quarter speed, and the two together reduce it by three octaves, and plays it at eighth speed.
 +
 
 +
This  is particularly useful for the Count Waves task - you can use the same combination of Shift and alt with the Play Seed buttong, and so use it to compare the trnascribed seed with the original at a lower pitch and slower speed. Especially useful for high pitched  quickly changing sounds like bird song.
 +
 
 +
==[[Window 66 | Opts...]]==
 +
 
 +
Configure the oscilloscope, play waveform as pitch glissandi for blind users
 +
 
 +
==[[Window 108 | Rec. Opts...]]==
 +
 
 +
Audio format for recording, display settings, and various options and tools.
 +
 
 +
==Rec. Vol.==
 +
 
 +
Select whether to record from microphone, or midi, or "what you hear" etc...
 +
 
 +
What you see hear depends on your system and soundcard. Usually there is a fader for the microphone and one for your  midi synth, or maybe "What you hear" or "Stereo mix" etc. It controls the standard levels of recording for the whole of your system and windows.
 +
 
 +
==Play Vol.==
 +
 
 +
Adjusts the playback volume for windows as a whole
 +
 
 +
==Help = F1==
 +
 
 +
Click for help for this window. Or F1. Other opts: Shift , Alt, Ctrl + click...
 +
 
 +
F1 or click shows the help for the current window in your web browser.
 +
 
 +
Some windows may have no help yet in which case the help icon is shown crossed out with a red line.
 +
 
 +
Shift + F1 or Shift + Click brings up the tool tips extra help window (this window) to show any extra help for a tool tip.
 +
 
 +
You can tell if a tool tip has extra help if it ends ... like this one.
 +
 
 +
Ctrl + F1 or Ctrl + click takes you to the list of keyboard shortcuts for Tune Smithy.
 +
 
 +
Alt + F1 or Alt + click (alternatively Caps lock physically held down + F1 or Click) takes you to the on-line page at the robertinventor.com web site about the current main window task - which gives a short introduction to it for newbies to the program. If there is no on-line page specific to a  task, takes you to the main tune smithy page on the web site.
 +
 
 +
Since the help for Tune Smithy is currently a bit out of date and needs to be redone completely for the new 3.0 release, then you may find the on-line page for some of the newer tasks particularly useful.
 +
 
 +
==[[Window 51 | Organise Windows = F2]]==
 +
 
 +
Reset, or Save settings for this window. RIGHT CLICK for all windows menu...
 +
 
 +
Shows the Organise windows window - which you can use to reset all the parameters for the current window.
 +
 
 +
You can also use it to save the settings for just this window, or open previously saved parameters for just this window.
 +
 
 +
Also has a drop list of all the windows and their shortcuts, and related options - some to do with the menu listing, and some to do with window resizing and minimising.
 +
=Neighbours, and [[Window 62 | Previous]] - [[All_Tune_Smithy_Windows | Up]] - [[Window 64 | Next]]=
 +
[[Window 166 Edit Wave Shape Player Voice (Ctrl + 166) ]]
-
[[Window 125 Tip of the Day (Ctrl + 125) ]]
+
[[Window 196 Wave Shape Player Instruments Menu (Ctrl + 196) ]]
-
[[Window 124 Musical e-card To and Subject (Ctrl + 124) ]]
+
[[Window 9 Parts (Ctrl +   9) ]]
-
[[Window 123 What to show on PC Keyboard pics, sustain and controller (Ctrl + 123 or Ctrl + K1) ]]
+
[[Window 8 Instruments (Ctrl +   8 or Ctrl + N) ]]
-
[[Window 122 Muscial E-card Picture and Tune (Ctrl + 122) ]]
+
[[Window 190 Volume Envelope for Wave Shape Player Voice (Ctrl + 190) ]]
-
[[Window 121 Make Muscial E-card (Ctrl + 121) ]]
+
[[Window 66 Oscilloscope Options (Ctrl + 66) ]]
-
N.B. This list of neighbours may change each time this help is updated - it is based on the windows I use myself most often after this one.
+
N.B. This list of neighbours may change when these pages are updated.

Latest revision as of 14:18, 2 November 2008

Previous - Up - Next

Contents

Oscilloscope

Screen Shot

Oscilloscope

Oscilloscope

Shows the music currently played or as it is recorded in an Oscilloscope...

Start rec.

Start the recording - short cut Page up...

This starts the temporary recording and the oscilloscope at the same time as the oscilloscope uses the temporary recording to analyse the sound to try and locate the wave.

Tip: the Page up shortcut also works from the PC keyboard music player.

To stop the recording you use Page down and again you can use that from the PC keyboard music player.

This stops the temporary recording and the oscilloscope at the same time.

This means you can pause the oscilloscope at a particular note you are currently playing in the pc keyboard player without needing to switch over to the oscilloscope to do it, to view the waveform at your leisure.

Stop

Stop the recording - short cut Page down...

This stops the temporary recording and the oscilloscope at the same time.

Tip: the Page down shortcut also works from the PC keyboard player.

This means you can pause the oscilloscope at a particular note you are currently playing in the pc keyboard player without needing to switch over to the oscilloscope to do it, to view the waveform at your leisure.

Play this

Play the waveform currently showing in the oscilloscope...

FTS may not always find the right wave if the waveform is complex - it looks for repeating waves and uses various heuristics to find it. If it finds one too high or low then you will find out when you play it. If it is in the same pitch as the original note then it found the correct wave.

You can also play the waveform as pitch glissandi using Shift + click on this button - this is mainly of interest to blind users as it gives a way of hearing the shape of the waveform from the way the pitch goes up and down - it fades as it crosses the zero position so that you know where that is too.

Play Rec

Play recording, Alt, Shift or both + Play to slow down and reduce freq...

The Shift + play plays a recording at half speed, so reduces the freq by an octave, and plays each note for twice as long as normal. Similarly Alt + play reduces the frequency by two octaves, at quarter speed, and the two together reduce it by three octaves, and plays it at eighth speed.

This is particularly useful for the Count Waves task - you can use the same combination of Shift and alt with the Play Seed buttong, and so use it to compare the trnascribed seed with the original at a lower pitch and slower speed. Especially useful for high pitched quickly changing sounds like bird song.

Opts...

Configure the oscilloscope, play waveform as pitch glissandi for blind users

Rec. Opts...

Audio format for recording, display settings, and various options and tools.

Rec. Vol.

Select whether to record from microphone, or midi, or "what you hear" etc...

What you see hear depends on your system and soundcard. Usually there is a fader for the microphone and one for your midi synth, or maybe "What you hear" or "Stereo mix" etc. It controls the standard levels of recording for the whole of your system and windows.

Play Vol.

Adjusts the playback volume for windows as a whole

Help = F1

Click for help for this window. Or F1. Other opts: Shift , Alt, Ctrl + click...

F1 or click shows the help for the current window in your web browser.

Some windows may have no help yet in which case the help icon is shown crossed out with a red line.

Shift + F1 or Shift + Click brings up the tool tips extra help window (this window) to show any extra help for a tool tip.

You can tell if a tool tip has extra help if it ends ... like this one.

Ctrl + F1 or Ctrl + click takes you to the list of keyboard shortcuts for Tune Smithy.

Alt + F1 or Alt + click (alternatively Caps lock physically held down + F1 or Click) takes you to the on-line page at the robertinventor.com web site about the current main window task - which gives a short introduction to it for newbies to the program. If there is no on-line page specific to a task, takes you to the main tune smithy page on the web site.

Since the help for Tune Smithy is currently a bit out of date and needs to be redone completely for the new 3.0 release, then you may find the on-line page for some of the newer tasks particularly useful.

Organise Windows = F2

Reset, or Save settings for this window. RIGHT CLICK for all windows menu...

Shows the Organise windows window - which you can use to reset all the parameters for the current window.

You can also use it to save the settings for just this window, or open previously saved parameters for just this window.

Also has a drop list of all the windows and their shortcuts, and related options - some to do with the menu listing, and some to do with window resizing and minimising.

Neighbours, and Previous - Up - Next

Edit Wave Shape Player Voice (Ctrl + 166)

Wave Shape Player Instruments Menu (Ctrl + 196)

Parts (Ctrl + 9)

Instruments (Ctrl + 8 or Ctrl + N)

Volume Envelope for Wave Shape Player Voice (Ctrl + 190)

Oscilloscope Options (Ctrl + 66)

N.B. This list of neighbours may change when these pages are updated.

Personal tools
Namespaces
Variants
Actions
Navigation
How to use the wiki
More
Toolbox